|
is this a good deal?
(Preview)
From:south___________________________________________________________________
|
jonathanD
|
2
|
1648
|
|
|
|
|
Front end alignment specs, 67 big car?
(Preview)
I'll be taking my car in for an alignment after the front end rebuild. A shop right down the street will do an old school alignment to what I'd like. I know I really shouldn't pay any heed to the old Bias Ply specs. According to most current wisdom I've read, big fat radial tires, and a need to have the car...
|
cdnpont
|
2
|
1297
|
|
|
|
|
Rear suspension bushings. 67 big car?
(Preview)
Does the 67 rear suspension actually have a smaller front lower bushing than the rear lower and uppers? I've often heard conflicting talk in the past on this. Anyone have any numbers for the parts? I'm planning on a rear suspension rebuild. New OEM bushings. F40 Springs Flex line. Adjustable panh...
|
cdnpont
|
6
|
1981
|
|
|
|
|
Ball joint, tie rod separator...
(Preview)
Wandering around Princess Auto the other day I found this joint separator on sale. I think $18 or so, so I thought "what the heck", I'm pulling the front end apart, so I'll give it a go. It works absolutely fantastic!!! In all the front ends I've beat to get the joint apart I should have had one...
|
cdnpont
|
5
|
1888
|
|
|
|
|
1967 Grand Parisienne front springs.
(Preview)
Been doing some poking around, trying to figure out the best spring that would be suitable for my GP. The stock front springs give the car a nice stance...but only when sitting still. Driving the car with passengers it just totaly sags. I'm attempting to actually get the car to handle decently, and no...
|
cdnpont
|
2
|
2017
|
|
|
|
|
Need help with part crossover
(Preview)
Will the steer box and brake booster from my 1966 grande parisienne fit ......a 1967 2+2
|
grande jim
|
6
|
1855
|
|
|
|
|
Spring cross reference, help 427Carl!
(
1 2
)
(Preview)
I'm going to start my front end rebuild on the 67 in a couple of weeks. Phase I will be new rubber bushings and ball joints. I'm lucky, I had a spare set of arms that I was able to blast, paint and add new bushings (oem) and ball joints. So it'll save a little time in doing the job. I'll replace the strut rod bush...
|
cdnpont
|
30
|
3090
|
|
|
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
|
|
|
Heater Core Question
(Preview)
I have a leaky heater core. There is a slight leak inside the car (carpet's wet). Can I disconnect the hoses, block them off (or should I join them, so the system still circulates?), and still drive it until I get the core leak fixed?
|
Pontiacanada
|
8
|
1675
|
|
|
|
|
Painting Rallys. What paint?
(Preview)
Bought the nice set +1 of 15x7's Velle Addict (Gary) had for sale here. Thanks Gary, nice to meet you!. They're for the 67, as my x8's with 255's rub in the back on the skirt latch. My hope is to fit the 255's onto to x7's to cure the rub. I'm hoping to touch them up a bit, and I love the argent silver tone th...
|
cdnpont
|
7
|
2896
|
|
|
|
|
Level ride - to be or not to be
(Preview)
I recently modified the old 3 link set up on the rear to a 4 link adjustable, c/w new bushings and springs. Everything is now square within 1mm but before this, the car leaned to the driver's side and afterward still leans about the same. Is out by about 1/2 to 3/4". Any suggestions on getting it...
|
1965CS
|
8
|
1868
|
|
|
|
|
frame dimensions
(Preview)
hey guys i just need the width of the frame from the fire wall to right before the rear wheel opening. -- Edited by jonathanD on Sunday 9th of May 2010 06:59:12 PM -- Edited by jonathanD on Sunday 9th of May 2010 08:27:09 PM
|
jonathanD
|
0
|
1006
|
|
|
|
|
took 2 hours to get off these bolts are on there
(Preview)
got my air tools lub and a hammer to get this one bolt off
|
jonathanD
|
2
|
1126
|
|
|
|
|
updated on the parisiennne
(Preview)
i have decided to send the frame to my metal shop and the body on top of a home made rolling stand im wondering if i could use 4x4 wood to make a box frame that would support if yall don't know what im talking about i can scan in my drawings and measurments or should i rent a arch and get my dad to weld together a...
|
jonathanD
|
5
|
1443
|
|
|
|
|
anyone got a frame?
(Preview)
hey again everyone still having a big problem even finding a frame some guy said he had a rust free frame i went and looked under the car there was a giant hole in the same spot as mine and some are far way so does anyone have a 1965-69 pontiac full size frame or a chevy frame thanks in advance jonathan have...
|
jonathanD
|
5
|
1408
|
|
|
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
|
|
|
Sway Bar bushings bolts, these under tention? Like front springs
(Preview)
Looks kind of easy n simple from the looks of it To change the front bushings, long bolt, sway bar bushings I was hoping it was an easy job, but have no idea If i start unbolting is there any tention on them like front springs All the bushings on my 66 Cat look dry rotted and could use a replacement I saw those n...
|
66CatfromBuffalo
|
7
|
1391
|
|
|
|
|
67 Parisienne convertible
(Preview)
After reading a lot of the information on frames I still need clarification. What years and models from Pontiac and Chev fit my 67. Thanks for your help
|
Ritchie
|
16
|
2311
|
|
|
|
|
B-body disc brake question
(Preview)
This question is related to my 68 Caprice but it applies to all 65-70 Canadian B-bodies so here goes. When I bought the Caprice, it had drums on the front, although the car had a disk brake pedal pad. When I investigated I found that the drums and spindles had junkyard markings on them. I figure the ori...
|
gparis7
|
8
|
2266
|
|
|
|
|
Dropped the gas tank...
(Preview)
Pulled the gas tank on the 2+2 last night. I found 40 years of crap in the tank along with the original sending unit. This explains why there were 2 in-line fuel filters that plugged up quickly! I will be changing the main fuel line too. Plugged in the new sending unit...gas gauge works now. The tank...
|
gtodrive
|
22
|
1985
|
|
|
|
|
started taking the parisienne apart for the up coming summer
(Preview)
hey guys i was wondering where the body bolts are on the car i was under the car looking but i could not find any?
|
jonathanD
|
7
|
1299
|
|
|
|
|
Got the rear stabilizer bar on!
(Preview)
Nice day, had the spacers and bolts, so I went and stole the Spohn Performance bar from my project chassis and installed it. Aftermarket look, and I'll put the stock one on when I hook up and get it from 427Carl. Big difference, but now I can really feel the sloppy front bushings and smaller front bar. S...
|
cdnpont
|
6
|
1828
|
|
|
