2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 1970 GTO with a 396


Poncho Master!

Status: Offline
Posts: 1977
Date:
1970 GTO with a 396


Maybe the70judge or numbers_guy can help with this myth:

 During the 1970 production year for the GTO in Oshawa they ran out of the 400 Pontiac engines for assembly and installed 396/402 Chevys. The rumor I heard, and I emphasize RUMOR is that there were 11 or 12 built.
 Anyone ever heard this one????

__________________


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

I wonder what color they would be?

__________________

 



Guru

Status: Offline
Posts: 500
Date:

I Have heard and some of the Pontiac guys over on Performance years forum have talked about them. But, I heard that they used the 454, and they apparently built 12.

I have been into Pontiacs or the GM A body style, since 1974 and so far not one has surfaced. It sure would be something to find..



__________________
Pete


A Poncho Legend!

Status: Online
Posts: 48633
Date:

It seems unlikely, considering the need for a much different wiring harness in the engine compartment, different brackets, pulleys, different transmission to fit the block etc. But, my favorite saying, "Never say never".

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Poncho Master!

Status: Offline
Posts: 2672
Date:

Carl Stevenson wrote:

It seems unlikely, considering the need for a much different wiring harness in the engine compartment, different brackets, pulleys, different transmission to fit the block etc. But, my favorite saying, "Never say never".



        I agree, it is not simply a "drop in" switch, motor mounts would be different, the exhaust manifolds exit in a different location so they would have to fab up some different head pipes, etc.  This switch would require some "engineering" in order to work properly, not something a bunch of guys on the line could just pull off themselves late at night.....



__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


Uber Guru

Status: Offline
Posts: 3113
Date:

If the Boys in Oshawa wouldn't put a Blue interior in a Black PickUp for me,when everything is sitting there,just because they say the colours don't go together.They're sure not gonna spend any time fittin" a BB in a GTO!!

__________________


A Poncho Legend!

Status: Offline
Posts: 26765
Date:

I remember reading that back in the 60's Chrysler would allow any colour combo. Green with orange interior? Sure, but first the district office would call the dealer to confirm. GM did build a few Corvettes in 2000 in an odd colour combo- Mellenium Yellow with Torch Red interior. A customer came into the dealer I worked at and wanted that combo. At first GM said no, but apparently they got 3 or 4 other requests. They granted the request one time and bult them all in a row. Man the car looked terrible! Too bright! The owner was delighted. He was quite a character with his snake-skin boots!
Todd


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Poncho Master!

Status: Offline
Posts: 2672
Date:

CDN2PLS2 wrote:

If the Boys in Oshawa wouldn't put a Blue interior in a Black PickUp for me,when everything is sitting there,just because they say the colours don't go together.They're sure not gonna spend any time fittin" a BB in a GTO!!



        Sure they would, you just had to buy 6 of them!  You could have put the extras in storage and just taken one down to Barrett Jackson in each year and marketed it as a single digit vehicle, one of six!!!  You could be retired now....



__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


Uber Guru

Status: Offline
Posts: 3113
Date:

Yup after not giving up,and going up the chain of command somebody at Oshawa told me if I put together a few more orders they would build it.Same as today,can't get a new one with what I want either! No Vortec Max with 8 foot box or 20" wheels.

__________________


Poncho Master!

Status: Offline
Posts: 2672
Date:

69Laurentian wrote:

I remember reading that back in the 60's Chrysler would allow any colour combo. Green with orange interior? Sure, but first the district office would call the dealer to confirm. GM did build a few Corvettes in 2000 in an odd colour combo- Mellenium Yellow with Torch Red interior. A customer came into the dealer I worked at and wanted that combo. At first GM said no, but apparently they got 3 or 4 other requests. They granted the request one time and bult them all in a row. Man the car looked terrible! Too bright! The owner was delighted. He was quite a character with his snake-skin boots!
Todd



That's the biggest problem today, 90% of the cars are either black, white, silver/grey or red.  Interiors are 90% charcoal and the rest are beige. BORING! Even a mundane car can be made to look much more attractive with some real colours.   

At least they are offering the new Challenger in orange with more 60's colours to come next year.  I hope GM is smart enough to do the same thing with the new Camaro, they will need all the help they can get to move those things out the door and justify the huge investment they have made in them.



__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


Guru

Status: Offline
Posts: 566
Date:

There is a Butternut Yellow 69 Beaumont with a white painted top and red interior. That is one of the oddest color combos I have ever seen.
James

__________________

1968 Beaumont SD396 

Laurens, South Carolina



A Poncho Legend!

Status: Offline
Posts: 26765
Date:

I've seen that Beaumont and to be honest, I like the combo. Then again, my Laurentian is Mayfair Maize (Butternut Yellow) with Medium Green Interior....


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Addicted!

Status: Offline
Posts: 301
Date:

Numbers_Guy here,

Well from 1970 onwards the T37, Tempest, LeMans and GTO wre built in Canada. Thanks to Auto Pact they replaced the Beaumont. You could get a Chevy small block 350 installed in those cars so a 396/454 wouldn't be that far of a stretch.

Saw a guy turn his nose in disgust on a '70 LeMans when he opened the hood and saw a Chevy orange 350 small block under the hood. His parting words were "see the original engines missing some nut job put a Chevy 350 small block in it" A quick check of the VIN number and cowl tag showed the car was an Oshawa built car.

The wiring harness wouln't care what its connected to as long as it has the right connectors. Did GM of Canada build any, who knows the engine would fit between the fenders so its possible.

Now all we need to do is find a '70 GTO built in Canada with a 396/454 and we're done.
If it happened they'd be really rare cars, today.

Anyone ever seen a '70 Pontiac Jury?


__________________
Dave Weir Member #1 Canadian Classic Chevelles & Beaumonts http://cdnclassics.chevelles.net/


A Poncho Legend!

Status: Offline
Posts: 26765
Date:

I met a guy in London with a 70 Tempest 2 door sedan and he swears he has documentation to prove it had(IIRC) a GMC 6 (a 292?). I know it was a 6 that didn't belong! It was some evaluation car. Anyone meet this guy? He shows up at the London Canadian tire cruise nights. The car is light green. He has a small block in it now. He bought the car from an elderly lady..
Tell us more about the Jury Numbers Guy. It rings a bell but for the life of me I can't remember what it was all about..


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Member

Status: Offline
Posts: 9
Date:

I am sure it's true guyz... Lots of odd stuff happened on the line if there was a motor failure or they ran out .. I have seen a #'s orig 1968 Firebird ( oshawa) with a 283 in it ( butter nut yellow in Nanaimo brent owns it) the car has 350 badges on it. there is also a 1963 pontiac 4 door sedan in Duncan with it's orig 409 in it.
evileye
I was at a car show in 00 in Summerland and talked with a guy with a 65GTO said he was restoring a 70 goat with its orig 396 BB found it in lower mainland in 85-86.  don't remember the guys name but his 65 was iris mist with 389 4 barrel 3 speed.  

__________________
1969 firebird 400 4 spd convertible
1969 firebird 350 HO 4 spd
1962 Bonneville
1948 Pontiac silver streak fleetleader
1960 pontiac 2 door stwgn project


Poncho Master!

Status: Offline
Posts: 1977
Date:

There is a 71 Luxury Lemans 2 door hardtop sitting at the GM dealer 20 minutes from my house. It has been sitting there for years. The car is orange with white interior and a 350 Chevy. I understand this is a rare car as well. It still has all of the trim on it. The owner had some work done on it at the dealership and he left it there when the work was done.

__________________


Uber Guru

Status: Offline
Posts: 3113
Date:

Still don't think it happened.Think of All the different parts,engine harness,p/s hoses,headpipes,starter on opposite side,rad,shroud,fuel lines,etc,etc,etc.Way too many changes for a smooth assy line.

__________________


Poncho Master!

Status: Offline
Posts: 2672
Date:

pontiacguy wrote:

I have seen a #'s orig 1968 Firebird ( oshawa) with a 283 in it



You sure about that?  To my knowledge, all first gen F bods were assembled at either Lordstown or Van Nuys.  Do you have a VIN for it?



-- Edited by Astro Jet at 12:55, 2008-01-31

__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

69Laurentian wrote:

I've seen that Beaumont and to be honest, I like the combo. Then again, my Laurentian is Mayfair Maize (Butternut Yellow) with Medium Green Interior....



        I love the yellow, and I love green!   lol



__________________

 



Poncho Master!

Status: Offline
Posts: 2672
Date:

CDN2PLS2 wrote:

Still don't think it happened.Think of All the different parts,engine harness,p/s hoses,headpipes,starter on opposite side,rad,shroud,fuel lines,etc,etc,etc.Way too many changes for a smooth assy line.



I agree with Mark.  As I stated earlier, this in not a simple drop in switch.  What did these guys do, hold up the line while they spliced in a wiring harness from a BB car and made all the other changes?

Guys, you are getting confused with Canadian built cars that were offered from the factory with Chevy engines.  64 or a 65 with 409?  No problem, it's right in the Canadian factory sales brochure, it was regular line option.  Same thing with a 71 Lemans with the orange Chevy 350 small block, right in the brochure, I've got all of them.  A bodies were always available with the Chevy straight six, I know, my dad factory ordered a 70 Cutlass with one and I still have it! 

The bottom line is, these combos were available from the factory through the normal ordering process so they had all the proper stuff to go under the hood.  Also, don't forget, as crude as they may seem from today's perspective, these cars' build sheets were computer generated.  They may have been using punch cards, but they were computer generated none the less.  To get all the proper stuff under the hood for a BB GTO, someone would have to have replaced at least half the punch cards that made up the order for the car to get all the proper stuff to the assembly line.

That being said, show me an actual car with paperwork from George and I'll consider it. ;)



__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


Addicted!

Status: Offline
Posts: 301
Date:

Let be clear on my post earlier. I was only takling about Canadian built cars. So any '70 GTO built in Canada could possibly come with a 396/454 engine if that option was available.

God knows they came out of the same plant that built the Chevelles which had those engines. Wouldn't have been a big production number to do it.

Now buyers have that option I'm not sure.

__________________
Dave Weir Member #1 Canadian Classic Chevelles & Beaumonts http://cdnclassics.chevelles.net/


Guru

Status: Offline
Posts: 500
Date:

Numbers_guy wrote:

Numbers_Guy here,

Well from 1970 onwards the T37, Tempest, LeMans and GTO wre built in Canada. Thanks to Auto Pact they replaced the Beaumont. You could get a Chevy small block 350 installed in those cars so a 396/454 wouldn't be that far of a stretch.

Saw a guy turn his nose in disgust on a '70 LeMans when he opened the hood and saw a Chevy orange 350 small block under the hood. His parting words were "see the original engines missing some nut job put a Chevy 350 small block in it" A quick check of the VIN number and cowl tag showed the car was an Oshawa built car.

The wiring harness wouln't care what its connected to as long as it has the right connectors. Did GM of Canada build any, who knows the engine would fit between the fenders so its possible.

Now all we need to do is find a '70 GTO built in Canada with a 396/454 and we're done.
If it happened they'd be really rare cars, today.

Anyone ever seen a '70 Pontiac Jury?



Yep.. there is one in Calgary.. sweet car

And as far as putting a chevy engine in the Lemans/GTO/T37/GT37 bodies.. they were all the same frame as the Chevelles,, It was just a matter of the frame mounts being changed out and a wire harness.. The inner fenders were the same.. battery mounted on the other side and there you were

But as far as a big block in a GTO in 70 , Never seen one and if so it would be worth quite a bit in this day, specially with the doc's.




__________________
Pete


Member

Status: Offline
Posts: 23
Date:

Lots of anomoliues occured in those days. Like I remember reading extensively on the possibility of LS-6/L-89 '70 SS454's being built. The L-890 option was available only on the 396/402. But this option was discontinued in Dec. '69. It was said that LS-6 short blocks were substituted in place of the 396 on cars woth paid orders.

The jury was out, and many said "No Way!!" when all of a sudden a documented SS454 LS-6/L-89 4-speed convertible surfaced.

Now, since Chevelles and Tempests were built on the same line in Oshawa, if there had been a lack of the proper Pontiac 400's it would have just been a matter of taking lego out of a differant box to put a 396 GTO together.

Also, I have learned that you can't take what is said in the brochures as gospel. My '73 Canadian Pontiac brochure lists the availability of the SD-455 in the Grand Prix. We all know that never happened. Also, in my '71 Chevy Light trucks brochure, they kist the availability of the LS-6 454 in the El Camino. Also something that didn't happen. The brochures are printed before the cars are built. Due to lead times, some last minute changes are made to the production cars that are not correctly reflected in the brochures.

Also, I have the "Cars" magazine that roadtests a SD-455 powered '73 GTO and declares it the performance car of the year. So I know that at least one of those was built, and I wonder whar became of that car.

Mike

__________________


Poncho Master!

Status: Offline
Posts: 2672
Date:

guidematic wrote:


"The jury was out, and many said "No Way!!" when all of a sudden a documented SS454 LS-6/L-89 4-speed convertible surfaced."

Do you have any documentation on this car?

"Now, since Chevelles and Tempests were built on the same line in Oshawa, if there had been a lack of the proper Pontiac 400's it would have just been a matter of taking lego out of a differant box to put a 396 GTO together."

It's one thing to substitute an LS6 block for a regular 396 block because it is a direct bolt in, nothing has to be adjusted or changed.  You can make that switch on the line quite easily.  It is quite another thing to all of sudden install a Chevy engine in a engine bay set up for a Pontiac block.  As Mark and I have pointed out, the GTO would have come down the line with a wiring harness, fuel lines, exhaust pipes, etc. ready to match up with a Pontiac block in Pontiac specific locations.  All GTOs had the Ram Air intake set-up and I don't think the height and position of the Q jet on a Chevy intake manifold is the same as on a Pontiac so the Ram Air system would not match up with the hood. I think even the PB booster and master cylinder as well as the brake line routing were different on a Pontiac powered A body.

Bottom line, do I believe Oshawa built cars that could have been ordered with a Chevy big block in the first place with a different Chevy big block than what was supposed to be available - Yes.  Do I believe they built Pontiac models that were  intended to have Pontiac engines only with Chevy engines substituted at the last minute - NO.



-- Edited by Astro Jet at 18:10, 2008-02-05

__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


A Poncho Legend!

Status: Online
Posts: 48633
Date:

Astro Jet wrote:

 

guidematic wrote:



Bottom line, do I believe Oshawa built cars that could have been ordered with a Chevy big block in the first place with a different Chevy big block than what was supposed to be available - Yes. Do I believe they built Pontiac models that were intended to have Pontiac engines only with Chevy engines substituted at the last minute - NO.



-- Edited by Astro Jet at 18:10, 2008-02-05

 



 Plus one here....

 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.