Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> To Pontiac rim...or not to Pontiac rim...? That is the question...
Post Info TOPIC: To Pontiac rim...or not to Pontiac rim...? That is the question...
Which would you prefer to see on a '66 Beaumont? [20 vote(s)]

Pontiac rims
40.0%
GM rims
60.0%
03cts sport


Uber Guru

Status: Offline
Posts: 3568
Date:
To Pontiac rim...or not to Pontiac rim...? That is the question...
Permalink  

I've always considered my '66 Beaumont to be a Pontiac...that is until recently.  I'm now feeling that "technically" it may very well not be a Pontiac.  (Not trying to start the debate though.)  In the past I used to run with Rally II's to ensure that people knew that it was a Poniac.  Now I'm not so sure that I will being doing that.  Hence the poll.

Any thoughts?  (One of my favorite looks is the Beaumont dog-dish caps on a wide steely...but that's another story.)
Thx in advance...

-- Edited by 03cts sport on Friday 21st of August 2009 10:52:27 PM

__________________

"So when you spot violence, or bigotry, or intolerance or fear or just garden-variety hatred or ignorance, just look it in the eye and think... The good outnumber you, and we always will."  Patton Oswalt
Beaumont4008


Uber Guru

Status: Offline
Posts: 3936
Date:
Permalink  

GM ralleys with the small centre caps or I like your thoughts about the dog dish caps.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
carnut70ls4


Addicted!

Status: Offline
Posts: 447
Date:
Permalink  

I like the dog dish approach myself, with the correct colour on the rim and right tire would be sharp!

__________________
67BBSD


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:
Permalink  

rallys/small centers

I'm doing aftermarket cragars and a set of rallys with wire caps so I can remove and install trim rings and cap on my 66

__________________
73SC


A Poncho Legend!

Status: Offline
Posts: 20258
Date:
Permalink  

As I said to you the other night I like Rally II's on Beaumonts.

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
65sssd


Poncho Master!

Status: Offline
Posts: 2908
Date:
Permalink  

Sorry, full faced hub caps on red line tires is the way to go. At least use the hub caps. Dogs are nice, but plain.

__________________
RDubya


Poncho Master!

Status: Offline
Posts: 2443
Date:
Permalink  

If it was my car i'd try the full hubcaps and redlines too.  Other than that i might go with vintage Cragars or Keystones.  Those are my preferences, since it seems everyone does the centre/ring thing.  I just like to be different.  Bottom line is go with what you like.smile

__________________

Randy

1967 Beaumont Custom 4 dr survivor
1985 Firebird

2004 Montana shortie

2007 Uplander extended*newest addition to fleet*

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

 Bottom line is go with what you like.smile


biggrin

 



__________________

 
03cts sport


Uber Guru

Status: Offline
Posts: 3568
Date:
Permalink  

blacktransam wrote:

If it was my car i'd try the full hubcaps and redlines too.  Other than that i might go with vintage Cragars or Keystones.  Those are my preferences, since it seems everyone does the centre/ring thing.  I just like to be different.  Bottom line is go with what you like.smile



Yeah, I think the Corvette/Camaro rims are too common for my liking, but when all is said and done...as much as I like the classiic Cragar 5 spokes, and the Torque thrusts, and the GTO rims, and the Ralley II's... I do seem to gravitate towards the C/C weels.  It might be different if I had some nice original dog-dishes though.smile
Thanks for the feedback thus far...

 



__________________

"So when you spot violence, or bigotry, or intolerance or fear or just garden-variety hatred or ignorance, just look it in the eye and think... The good outnumber you, and we always will."  Patton Oswalt
ak 67sd


Poncho Master!

Status: Offline
Posts: 1932
Date:
Permalink  

maybe some colour coded steel wheels and dogdishes... they pop up on ebay from time to time....



__________________

Wpg, MB to London, ON

Numbers don't match! Especially HP and ET. 
67BBSD


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:
Permalink  

hey Andrew, how come you don't run wheel opening mouldings ?

__________________
03cts sport


Uber Guru

Status: Offline
Posts: 3568
Date:
Permalink  

ak 67sd wrote:

maybe some colour coded steel wheels and dogdishes... they pop up on ebay from time to time....


Luv that look, especially with trim/beauty rims!  (Those dogdishes must be tough to come by?...)

 



__________________

"So when you spot violence, or bigotry, or intolerance or fear or just garden-variety hatred or ignorance, just look it in the eye and think... The good outnumber you, and we always will."  Patton Oswalt
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
ak 67sd


Poncho Master!

Status: Offline
Posts: 1932
Date:
Permalink  

i found mine on ebay, there have been a few sets on there, they do come up... i started by buying one, then a full set came along...

ken, do you think all sports optioned cars came with mouldings? seems like all 738 cars have them on... its not on my paperwork, i do have a set of mouldings from ausleys, i bought them last year but only pulled them out this weekend... one of the rear mouldings still in the bag was previously installed and had some damage on the lip! pissed me off! i'm going to call ausleys to see if they'll make it right! they are really cheaply made though, s.korea and really flimsy... not sure if i'll like the look of them on the car...

ak

__________________

Wpg, MB to London, ON

Numbers don't match! Especially HP and ET. 
73SC


A Poncho Legend!

Status: Offline
Posts: 20258
Date:
Permalink  

Check out this link:

http://moncton.kijiji.ca/c-cars-vehicles-classic-cars-1969-Beaumont-project-car-W0QQAdIdZ148653203


Look in the front seat...your dog dishes are right there! Car is sold but maybe you can still grab the doggies.

-- Edited by 73SC on Monday 24th of August 2009 08:21:02 PM

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
67BBSD


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:
Permalink  

ak 67sd wrote:

i found mine on ebay, there have been a few sets on there, they do come up... i started by buying one, then a full set came along...

ken, do you think all sports optioned cars came with mouldings? seems like all 738 cars have them on... its not on my paperwork, i do have a set of mouldings from ausleys, i bought them last year but only pulled them out this weekend... one of the rear mouldings still in the bag was previously installed and had some damage on the lip! pissed me off! i'm going to call ausleys to see if they'll make it right! they are really cheaply made though, s.korea and really flimsy... not sure if i'll like the look of them on the car...

ak



 If I recall correctly-I think 67's don't fit well-don't quote me though-wouldn't want to be bashing someones product

Don't know what it should have-but they would look good



__________________
67BBSD


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:
Permalink  

73SC wrote:

Check out this link:

http://moncton.kijiji.ca/c-cars-vehicles-classic-cars-1969-Beaumont-project-car-W0QQAdIdZ148653203


Look in the front seat...your dog dishes are right there! Car is sold but maybe you can still grab the doggies.

-- Edited by 73SC on Monday 24th of August 2009 08:21:02 PM


You the Man Ray ! best drag you to swap meets with eyes like that !

 



__________________
ak 67sd


Poncho Master!

Status: Offline
Posts: 1932
Date:
Permalink  

Thought i'd update and give a pat on the back to Ausleys Chevelle parts... i called them and told them that i bought some mouldings last year, just got around to looking at them and one was damaged and previously installed... they are shipping out the replacement tommorrow, no questions asked!! Good on them, taking the customers word for it, and making it right!

ak

__________________

Wpg, MB to London, ON

Numbers don't match! Especially HP and ET. 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
BBB-66-SD


Veteran Member

Status: Offline
Posts: 55
Date:
Permalink  

ak 67sd wrote:

maybe some colour coded steel wheels and dogdishes... they pop up on ebay from time to time....



Thats what  I'm talking  aboutsmile



__________________
cool 69


Addicted!

Status: Offline
Posts: 128
Date:
Permalink  

CORVETTE RALLEY'S BELONG ON A VETTE NOT A BEAUMONT OR ANYTHING ELSE AT ALL.

__________________

69 427 Beaumont Deluxe
69 Beaumont post sedan (project)
68 Sport Deluxe

05 Blazer
08 Silverado
07 Peterbilt
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50218
Date:
Permalink  

cool 69 wrote:

CORVETTE RALLEY'S BELONG ON A VETTE NOT A BEAUMONT OR ANYTHING ELSE AT ALL.


???????

In the spirit of hot rodding, pretty much anything belongs on anything if we want it that way, wouldn't you agree???

 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
03cts sport


Uber Guru

Status: Offline
Posts: 3568
Date:
Permalink  

cool 69 wrote:

CORVETTE RALLEY'S BELONG ON A VETTE NOT A BEAUMONT OR ANYTHING ELSE AT ALL.


IT'S ALIIIIIIIIIVE!!!!  
It surprised me to see this thread come alive again!
Too late, I picked up the 'vette style ralleys, (followed by some dog dishes that I was lucky to come across.  Recieved the tires yesterday.)  Re the quote, I believe in 67 the same wheels became available from the factory on the Beaumont (albiet with a different center cap.)  Therefore, they may not "belong" on a Beaumont, but they do "belong" on a Beaumont. 
Thanks for the feedback!

 



__________________

"So when you spot violence, or bigotry, or intolerance or fear or just garden-variety hatred or ignorance, just look it in the eye and think... The good outnumber you, and we always will."  Patton Oswalt
62Beaumont


Addicted!

Status: Offline
Posts: 477
Date:
Permalink  

03cts sport wrote:
I picked up the 'vette style ralleys, (followed by some dog dishes that I was lucky to come across. 
Perfect timing for this thread to pop up.

I'm undecided what I want to do on my car, I have the right size rallies for my car but would need different caps...
or I'll need to pick up some streelies so I can use my dog dishes.

So which caps are you gonna run with the rallies or are you going steelies with dog dishes?

__________________

SOLD - '62 Acadian Beaumont 2dr HT

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50218
Date:
Permalink  

Joel

I got a set of dog dishes for my Acadian as well. Not correct for a Sport Deluxe but there's something about a dog dishes on a car...

I think a 327 with a 4 speed and dog dishes may be the look for me on chosen days.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
03cts sport


Uber Guru

Status: Offline
Posts: 3568
Date:
Permalink  

62Beaumont wrote:

03cts sport wrote:
I picked up the 'vette style ralleys, (followed by some dog dishes that I was lucky to come across. 
Perfect timing for this thread to pop up.

I'm undecided what I want to do on my car, I have the right size rallies for my car but would need different caps...
or I'll need to pick up some streelies so I can use my dog dishes.

So which caps are you gonna run with the rallies or are you going steelies with dog dishes?
Initially I'm going to put on the white letter TA's with the 'vette rallies (15" 235x60 on the front and 255x60 on the rear).  However, at some point I'm going to go with steelies (probably from Wheel Vintiques), black walls (as red lines cost too much), and the dog dish.  When I do that, I'm still somewhat open to possibly going with
17" rims with the dog dish.  I think that would be a good somewhat unique look. (Although the wheels would weigh a ton.)

 



__________________

"So when you spot violence, or bigotry, or intolerance or fear or just garden-variety hatred or ignorance, just look it in the eye and think... The good outnumber you, and we always will."  Patton Oswalt
cheetah 427


Poncho Master!

Status: Offline
Posts: 1131
Date:
Permalink  

66 beaumonts look cool with the poverty caps and steel wheels, rallys look cool on the 67 68 69 cars cuz they came that way, but the p01 caps are kina lame in 66, i think the steelys and poverty caps look mean and there not on every car you see, so just have all the above and change them like underware, sweet!!!! lol

__________________
1 2 3 4  >  Last»  | Page of 4  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> To Pontiac rim...or not to Pontiac rim...? That is the question...
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.