Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: looking for rear bump stops for my 70 2+2


Canadian Poncho Superstar!

Status: Offline
Posts: 4771
Date:
looking for rear bump stops for my 70 2+2


i was looking for rear bump stops for the rag. napa no go. gm notta before 76 unless vette. on the net i checked out antique chev and impala bobs nothing again.  i can make the generic one from Energy Suspension work but i was hoping for at least one car to be stock. also do the rear coils have a rubber seat on the top or is it metal to metal. any suggestions


__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

MY 66 IS metal to metal   and a little plate and bolt  to hold bottom

__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Stephenzone wrote:

i was looking for rear bump stops for the rag. napa no go. gm notta



         whats a bump stop?



__________________

 



Guru

Status: Offline
Posts: 648
Date:

are you talking about the rubber bumpers on each side of the frame arch?

__________________

Brighton,Ont.

 



A Poncho Legend!

Status: Offline
Posts: 50051
Date:

Yes, can you clarify please Steve?

I like digging for old stuff like that.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Canadian Poncho Superstar!

Status: Offline
Posts: 4771
Date:

rarechev wrote:

are you talking about the rubber bumpers on each side of the frame arch?



underneath the rear frame arch to stop the axle from hitting the frame. one on each side about 4 in long 2 in high and 2 in wide with a bolt hole at each end to screw into the frame.



-- Edited by Stephenzone on Wednesday 9th of December 2009 11:36:05 PM

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Uber Guru

Status: Offline
Posts: 3936
Date:

Used or new ? I have a used set of my 69 Beaumont 10 bolt.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Canadian Poncho Superstar!

Status: Offline
Posts: 4771
Date:

like new. but will go with used

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Uber Guru

Status: Offline
Posts: 3936
Date:

I see your after the top ones on the frame, I have ones that go on the diff and push into a slot, not the ones your looking for. 

Not sure on the 70's but the assy manual for 69 refers to a top rubber insolator for the top of the spring.

__________________


A Poncho Legend!

Status: Offline
Posts: 50051
Date:

I will try to remember to check it out tomorrow Steve.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Canadian Poncho Superstar!

Status: Offline
Posts: 10567
Date:

Tamaraz's on Ebay has them Steven.

Rather pricey at $18 USD. But they're a item that was not even available or repoped until just recently.

I ended up using two of the best used ones I had, and they were pretty worn and torn. Nothing was available then.

I'll bet Dale at NOS could get them. Or try Antique chevrolet in Oakville.

Axle bump stop

k00204.jpg

1736279326_a3d40e2152.jpg



-- Edited by cdnpont on Thursday 10th of December 2009 08:56:14 AM

__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

cdnpont wrote:

Tamaraz's on Ebay has them Steven.

Rather pricey at $18 USD. But they're a item that was not even available or repoped until just recently.

I ended up using two of the best used ones I had, and they were pretty worn and torn. Nothing was available then.

I'll bet Dale at NOS could get them. Or try Antique chevrolet in Oakville.

Axle bump stop

k00204.jpg

1736279326_a3d40e2152.jpg



-- Edited by cdnpont on Thursday 10th of December 2009 08:56:14 AM



        Cool    now I know...

 



__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Uber Guru

Status: Offline
Posts: 3463
Date:

heard the energy susp. stops for jeeps are very close to the b-body ones steve.
i still don't have a set on the bel air frame yet.

no rubber seats are used on the front or rear b-body springs.

-- Edited by 69 belair on Thursday 10th of December 2009 09:38:09 PM

__________________

 








Canadian Poncho Superstar!

Status: Offline
Posts: 4771
Date:

thanxs guys. i'll spring for the tamraz one. but i can wait awhile to see what else i'll need. the ones on my 55 truck look almost the same for bolt pattern.

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Canadian Poncho Superstar!

Status: Offline
Posts: 4771
Date:

i was over at a friends shop crying about the bump stops and he pulled these out of a cupboard and asked if i could use them. only half a inch off and the steel strap is removable. they're for a ford but what the hell.



as per normal click happy

-- Edited by Stephenzone on Friday 11th of December 2009 02:01:08 PM

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.