2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Fibreglass resin hardner


Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:
Fibreglass resin hardner


Can the hardner loose it's "punch" I glassed the trans hump I'm fabricating for the 52. dumped quite a bit of hardner in the resin BUT it's taking forever for it to cure. Some spots have cured hard & otherspots are still tacky. Even put a heat lamp on it for an hour. Now its sitting in the air flow from furnace in garage over night.



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Addicted!

Status: Offline
Posts: 362
Date:

By the sounds of it you didn't mix the hardner well enough with the resin, been there to, it should harden after awhile.

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:

NEED BETTER MIX, NEED BETTER OUTSIDE TEMPERATURE, NEED LONGER HEAT LAMP



__________________


Addicted!

Status: Offline
Posts: 464
Date:

Well seeing as I used to make this stuff I guess I should put in my 2 cents. With certin spots hardening and others not it is a mixing issue. When mixing if you are using a blue multi purpose resin it will turn brown in the cup. Another thing I noticed is you mention you dumped in quite a bit. Thats not always good. Fiberglass resin is best mixed at 2% hardner and will have a kick off time of approx 14-17 mins at 70 degreesF. If it is still wet or tacky in the morning you can mix a little more and just go over the stuff you have done already and it will help activate the layer you have on already. It will take some time to cure still but will speed up the process Hope this info might help you out

__________________
Life is not about arriving to the grave safely in a well preserved body other to go skidding in sideways yelling out holy s*#t what a ride


Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:

Thanks Marty, just went out & checked it, still "tacky" in a few spots 7:00 am I thought I'd put enough in it but "maybe" not enough for the amount I mixed. The last time I did "glass" work it activated "TOO" quick on me. Guess if you do enough you get the "hang" of it!!! I'll put another coat on it .

__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:

Picture 119.jpgPicture 120.jpgPicture 121.jpgPicture 122.jpgWent over it again with another "batch" of glass. This time it cured quickly. Heres some pics of what I fab'd, once the carpet goes in think it will do the job.



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Guru

Status: Offline
Posts: 887
Date:

Looks great!  just hope the first layer was at least gelled with no soft areas....


 



__________________

65 Custom Sport Convertible

Southern Alberta



Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:

1965CS wrote:

Looks great!  just hope the first layer was at least gelled with no soft areas....


 


 It had pretty well cured & I helped it along w/some heat!!!  2nd. batch "stiffened" up quick. It made a "BIG" difference in the noise on a quick trip up the street & back. Next on the "list" is to bolt the seats in.



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.