Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 66 Grande Guy *


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
66 Grande Guy *


any post with *  may contain information for entertainment purposes only

 

Many thanks to  Ken Y.  for shipping me a nice set of 66 Pontiac wheel covers   I had wanted them for the spinners for my 15x8 Rally rims  (as he has on his car)  

He would not take any funds for the set......     what a guy.....   IMG_0340.jpg

 

Interestingly!   they are rare 396/427 covers!       Not many know that the Big Block covers are balanced and have 16 attaching clips instead of 12!!!    

In the attached photo you can see that the single spinner bar points and the side of the cover with the valve hole   That for perfect balance   

 

IMG_0341.jpg



Attachments
__________________

 



Canadian Poncho Superstar!

Status: Offline
Posts: 7176
Date:

Nice!

__________________

later...rog

AADD supporting member !!
I'm a collector...not a builder!!Located in sunny central Saskatchewan at the lakehead!


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

I think they are RHD confuse as there were probably no 396/427's exported ?    I will see if they are directional   biggrin



__________________

 



Canadian Poncho Superstar!

Status: Offline
Posts: 7490
Date:

Did they use the same caps on the front wheels as on the rear wheels?



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop
72 GMC Sierra

 

 



Canadian Poncho Superstar!

Status: Offline
Posts: 6020
Date:

427carl wrote:

I think they are RHD confuse as there were probably no 396/427's exported ?    I will see if they are directional   biggrin


 They'll be fine if there directional Carl, just drive around in Reverse biggrin



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 5001
Date:

427carl wrote:

 

Interestingly!   they are rare 396/427 covers!       Not many know that the Big Block covers are balanced and have 16 attaching clips instead of 12!!!    

In the attached photo you can see that the single spinner bar points and the side of the cover with the valve hole   That for perfect balance   

 

IMG_0341.jpg


 Were the rims for these 14" or 15"?

There is a hub cap on ebay that lists it as 14"....is 14" the correct size?

http://www.ebay.com/itm/1966-1967-66-67-PONTIAC-BONNEVILLE-CATALINA-GP-EXEC-WHEEL-COVER-14-SPINNER-SD3-/191202403099?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c848d231b&vxp=mtr



__________________


A Poncho Legend!

Status: Offline
Posts: 48885
Date:

Yes, that cover is available only in 14"

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



A Poncho Legend!

Status: Offline
Posts: 48885
Date:

427carl wrote:

any post with *  may contain information for entertainment purposes only

 

Many thanks to  Ken Y.  for shipping me a nice set of 66 Pontiac wheel covers   I had wanted them for the spinners for my 15x8 Rally rims  (as he has on his car)  

He would not take any funds for the set......     what a guy.....   IMG_0340.jpg

 

Interestingly!   they are rare 396/427 covers!       Not many know that the Big Block covers are balanced and have 16 attaching clips instead of 12!!!    

In the attached photo you can see that the single spinner bar points and the side of the cover with the valve hole   That for perfect balance   

 

IMG_0341.jpg





Carl, be careful. Years ago I bought a used set of those 4 my 427 speed car. I put them on and my valves would always float on full throttle 1/4 mile passes. I tore the engine down twice trying to find the problem and in the end I discovered one of the original clips on one of the wheel covers had been replaced with a small block wheel cover clip. PS Atta boy Ken, yet another CP'er is the recipient of your generosity.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Carl Stevenson wrote:
427carl wrote:

set......     what a guy.....   

 

 

 



 



Carl, be careful. Years ago I bought a used set of those 4 my 427 speed car. I put them on and my valves would always float on full throttle 1/4 mile passes. I tore the engine down twice trying to find the problem and in the end I discovered one of the original clips on one of the wheel covers had been replaced with a small block wheel cover clip. PS Atta boy Ken, yet another CP'er is the recipient of your generosity.


          Can't fool me !!   I'm taking the covers to London Driveline to have them verifiy the clips and balance  



__________________

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.