Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Chassis Tech Forum -> Upgrading: A-Arm control bushings & ball joints
Post Info TOPIC: Upgrading: A-Arm control bushings & ball joints
jlysholm


Guru

Status: Offline
Posts: 611
Date:
Upgrading: A-Arm control bushings & ball joints
Permalink  

Hi guys,

 

Need sum help/feedback regarding stock front A-arm control bushings Vrs, polyurethane upgrades. Do the polyurethane kits provide a noticeable improvement?

What bushing kit did you choose? Are they a pain in the arse to install? (as opposed to GM stock) confuse

 

I also want to replace the front ball joints while I've got everything apart.  Has anyone chosen the Hotchkis ball joint replacements?

 

 

 



__________________
"you can't burn out, if your not on fire" -Jim Morrison
pudge444


Addicted!

Status: Offline
Posts: 416
Date:
Permalink  

This is what I installed in my lower front control arms. My car isn't on the road yet. Easy install.

http://www.globalwest.net/stock-lower-control-arm-aluminum-bushings-camaro-1967-1968-1969-global-west-.html

 

 



-- Edited by pudge444 on Sunday 22nd of February 2015 03:20:27 PM

__________________

67 Beaumonts Rule!!
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
long stroke


Canadian Poncho Superstar!

Status: Offline
Posts: 5990
Date:
Permalink  

The poly bushings will drive you right up the wall with never ending noise and they are as stiff as hell. Stay with stock bushings and you will be a much happier fellow. 



__________________

1957 Pontiac Pathfinder Deluxe sedan restored 261 six

1974 Chevrolet Caprice Estate wagon low mileage original 400 V-8
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

Can't beat  GM style replacement...     old ones have been good for 48 years       aftermarket stuff is junk 



__________________

 
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10527
Date:
Permalink  

If it were me, with the level of performance under hood,  I'd go with the precision Global West Del A Lum as well.

You'll gain full compliance missing with elastomeric rubber, they won't squeek like poly, and will not be harsh.

But I certainly get that you might want to keep a total stock look.

Cheers,



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
dualquadpete


Canadian Poncho Superstar!

Status: Offline
Posts: 5682
Date:
Permalink  

long stroke wrote:

The poly bushings will drive you right up the wall with never ending noise and they are as stiff as hell. Stay with stock bushings and you will be a much happier fellow. 

Gotta agree with George here, "Poly" bushings will ride like a "DUMP TRUCK" unless your looking for that ride????  or building a Slalom car or track racer???



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.
bowtieboy


Addicted!

Status: Offline
Posts: 241
Date:
Permalink  

I've got poly control arm bushings all the way around, kind of a bit overkill I'd say. Although it does handle nice and tight, fairly firm ride as well. They also don't squeak......yet.

__________________

67 Beaumont- Work in progress

83 K20- to much to list

97 GMC SLE: Cranked N Dualed

02 Cavalier, the sleeper that wont wake up.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Chassis Tech Forum -> Upgrading: A-Arm control bushings & ball joints
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.