Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Pre 1958 Canadian Pontiac Power Train Tech Forum -> Need a new carb. 2 barls
Post Info TOPIC: Need a new carb. 2 barls
pontiac 1957


Veteran Member

Status: Offline
Posts: 29
Date:
Need a new carb. 2 barls
Permalink  

Hi

I want to know where I can find a new 2 brls carb. for a 283 cu.in. and a 2 speeeds trans.

For now I have a 2 brls carb with oil air filter. The carb is not connect to the trans.

Can I change it for an air filter carb?

I want someting to fit with the transmission.

Thank You Guys

 



__________________

Alain
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

This is the closest I could find     

 

 

http://www.kijiji.ca/v-engines-and-engine-parts/ottawa/chevy-350-intake-and-2-bbl-carb-1970-1979/1089506659?enableSearchNavigationFlag=true



__________________

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
pontiac 1957


Veteran Member

Status: Offline
Posts: 29
Date:
Permalink  

Hi 427 carl

Are you sure it' going to fit on my 283 cu.in.



__________________

Alain
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
RE: Need a new carb. 2 bbls
Permalink  

I think so    but we will wait for another answer      I wonder about a re-built carb from a parts store like Napa or Car Quest 



__________________

 
MickyG


Veteran Member

Status: Offline
Posts: 88
Date:
RE: Need a new carb. 2 barls
Permalink  

I could be wrong but I believe every SBC intake 1986 and down are interchangeable. Afther that if i remember correctly the 4 bolt in the center dont fit if the intake holes are not sloted .

__________________
davelacourse


Poncho Master!

Status: Offline
Posts: 2249
Date:
Permalink  

pontiac 1957 wrote:
I want someting to fit with the transmission.

What you need is the linkage for the kickdown (automatically downshift when you stomp on the gas pedal) eh?

223-2.gif

Dave



Attachments
__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering
Pontiacanada


A Poncho Legend!

Status: Offline
Posts: 20744
Date:
Permalink  

Chokes changed through the years.



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
MickyG


Veteran Member

Status: Offline
Posts: 88
Date:
Permalink  

If i were you .... i would go buy a nice 650cfm edelbrock carb with electric choke .... you won't regret it ! And they make kickdown bracket for any transmission .

__________________
pontiac 1957


Veteran Member

Status: Offline
Posts: 29
Date:
Permalink  

you're right

But where can I find those pièces?



__________________

Alain
MickyG


Veteran Member

Status: Offline
Posts: 88
Date:
Permalink  

I doubt you're going to find a original linkage for your application . That's why i sugested going towards a Edelbrock carb and braket.
You can find them online or at any speedshop .

Tu habite quel coin ?

__________________
pontiac 1957


Veteran Member

Status: Offline
Posts: 29
Date:
Permalink  

I live at st-hubert near montreal

Whatabout the used carb somebody proposed me

Do you think it's a good deal



__________________

Alain
MickyG


Veteran Member

Status: Offline
Posts: 88
Date:
Permalink  

I personaly would never put a used Carb on a good engine ....
Pay a bit more and be sure to enjoy the rest of the summer !!

En réalitée, mettre un carburateur usagé; t'a 50% de chance que ca marche .... et 50% de chance que tu aille tellement de problemes avec le moteur que tu te mette a detester ton achat ! Tout ca pour 300$ de différence ! Sans compter que si tu n'est pas mécanicien comme moi, il faut que tu paye quelqu'un a chaque fois pour l'installer et l'ajuster !

J'ai acheter 2 fois des usagés; plus jamais ! 



-- Edited by MickyG on Wednesday 29th of July 2015 10:26:18 PM

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
rabbit64cs


Canadian Poncho Superstar!

Status: Offline
Posts: 7183
Date:
Permalink  

Your carb will be a small base Rochester 2GC , sometime in the mid 60's the base pattern changed.

__________________

later...rog

AADD supporting member !!
I'm a collector...not a builder!!Located in sunny central Saskatchewan at the lakehead!
MickyG


Veteran Member

Status: Offline
Posts: 88
Date:
Permalink  

if you want to stay true to the original design, the part number for a rebuilt carb is 3-324 .


you can use the number and go to Carquest with it, since they are now part of Advance auto parts or type 3-324 carburetor in Google and let the magic of the web do it stuff ! :p





-- Edited by MickyG on Wednesday 29th of July 2015 11:00:43 PM

__________________
brad2v


Addicted!

Status: Offline
Posts: 120
Date:
Permalink  

What's wrong with the carb on the car now? I'd lean towards rebuilding that one, and sourcing the missing kickdown linkage. Aftermarket reman carbs often leave a lot to be desired. And the oil bath air cleaner is really a superior design to paper filters. The manufacturers only switched because paper filters are cheaper (for them, not the end user).

__________________
long stroke


Canadian Poncho Superstar!

Status: Offline
Posts: 5990
Date:
Permalink  

I agree with Brad, rebuild the original you have.



__________________

1957 Pontiac Pathfinder Deluxe sedan restored 261 six

1974 Chevrolet Caprice Estate wagon low mileage original 400 V-8
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Pre 1958 Canadian Pontiac Power Train Tech Forum -> Need a new carb. 2 barls
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.