Save 5% at Vevor and Support Canadian Poncho!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Canadian Pontiac/Acadian/Beaumont Cars/Parts Wanted -> Bellhousing Wanted For 11" Clutch
Post Info TOPIC: Bellhousing Wanted For 11" Clutch
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Bellhousing Wanted For 11" Clutch
Permalink  

Does anyone happen to have a bellhousing for an 11" clutch? I am thinking eventually I will want to change over to an 11".

The original one for my car would be a 3899621 casting number.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
65 SD L79


Canadian Poncho Superstar!

Status: Online
Posts: 9536
Date:
Permalink  

the repops don't look original at all



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Bellhousing Wanted For 11
Permalink  

I am hoping for an original just because, and also I read on one forum that the buyer had trouble with his not being "true" which cause issues. I am told it needs to be extremely tight as to tolerances.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7796
Date:
Permalink  

Finding a good 621 bellhousing is a challenge.

When gathering parts for my 4 speed swap, I bought one on ebay from somewhere in Canada and it was cracked and had some chips out of the block mating surface. When I queried the seller, he said "well I held it up and banged it, and it rang like a bell so I thought it was ok". I ended up returning it.

The second one I bought has some hairline cracks, it looks like where the molten aluminum flowed into the mold. When I queried that vendor, I got no reply. That's the one I used. On the plus side, it included the bolts for tranny mounting.

The inspection cover is readily available.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
DonSSDD


Canadian Poncho Superstar!

Status: Offline
Posts: 5737
Date:
Permalink  

Carl, a pre 63 cast iron will work fine while you are looking for the correct one, all were for the 168 tooth flywheels. Search for the closed bottom aluminum for the corvette BBs for 65 on. There are later closed bottom aluminum bhs from trucks that will work as well.

__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic
Bill shuba


Guru

Status: Offline
Posts: 732
Date:
Bellhousing Wanted For 11" Clutch
Permalink  

Carl was searching 69 impalla parts on ebay there were 621.s there not repops ..cheap also hope you can find one !!  go too 69 impala parts ebay  then "go to see all results on bottom of page : click on #3  Yenko 11 inch 621  169.00 theres also others



-- Edited by Bill shuba on Sunday 17th of February 2019 09:26:43 PM



-- Edited by Bill shuba on Sunday 17th of February 2019 09:27:48 PM

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Permalink  

DonSSDD wrote:

Carl, a pre 63 cast iron will work fine while you are looking for the correct one, all were for the 168 tooth flywheels. Search for the closed bottom aluminum for the corvette BBs for 65 on. There are later closed bottom aluminum bhs from trucks that will work as well.




Does the truck housing have the threaded boss in the side for the Z bar pivot ball for B bodies?

621.jpg



Attachments
__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7796
Date:
Bellhousing Wanted For 11
Permalink  

Here's one on ebay, But it Now for $149 US. No cracks or welds, nice shape but needs some paint stripper.

www.ebay.com/itm/Chevelle-Corvette-Nova-Camaro-Bell-Housing-4-Speed-3899621/253505228041



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Permalink  

I'm hoping to find one closer to home, and preferably from a site member or someone I know. I see them on ebay and Craigslist though, yes.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
DonSSDD


Canadian Poncho Superstar!

Status: Offline
Posts: 5737
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

Carl Stevenson wrote:
DonSSDD wrote:

Carl, a pre 63 cast iron will work fine while you are looking for the correct one, all were for the 168 tooth flywheels. Search for the closed bottom aluminum for the corvette BBs for 65 on. There are later closed bottom aluminum bhs from trucks that will work as well.


 



Does the truck housing have the threaded boss in the side for the Z bar pivot ball for B bodies?

621.jpg

Im not familiar with these new cars Carl, newer than 64 that is. As a guess, Id say the newer truck bh would have this as why would gm make a different one for the truck? The geometry would be the same for a bb car and truck in later years?



__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic
Yams


Veteran Member

Status: Offline
Posts: 86
Date:
Permalink  

Truck one will work. Go to your local pick-a-part and grab one. I spied a couple here in NS at a junkyard that I'm going to grab when it dries up here. Can't get at them right now, they're frozen in the ground and when it warms up it's a mud pit.

We just installed one on my brothers Nova and it's perfect. Has the screw in ball for z bar. Pulled it off a '79 3/4 ton 2 wheel drive truck in the summer. Polished it and looks great!



-- Edited by Yams on Monday 18th of February 2019 07:47:10 AM

__________________
Yams


Veteran Member

Status: Offline
Posts: 86
Date:
Bellhousing Wanted For 11
Permalink  

Just remembered a site that you can look at. 4speedconversions.com They give all the information needed for you in regards to what fits what, and what bellhousing came from what type of vehicle. It's pretty good.

www.4speedconversions.com/chevy-bellhousings.html

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

Yams wrote:

Just remembered a site that you can look at. 4speedconversions.com They give all the information needed for you in regards to what fits what, and what bellhousing came from what type of vehicle. It's pretty good.

www.4speedconversions.com/chevy-bellhousings.html




That's where I stole the picture of the bellhousing!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
canam


Veteran Member

Status: Offline
Posts: 61
Date:
Permalink  

Hi Carl,I have a truck bell housing with the threaded boss for z bar pivot 

Cast # is 6263756.Nice and clean in appearance with no cracks $40.00 plus shipping .Only Problem I'm in southern On.

Bill



__________________
Bill Rudow
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Bellhousing Wanted For 11
Permalink  

Does that have the 4.68" hole for the transmission input housing? I thought the trucks had a bigger opening in them. I think the trucks were about 5" maybe?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8240
Date:
Permalink  

i used the truck bellhousing in my 65 invader i bought a ring that fit into the trans opening to adapt to the smaller size,if you can find a truck bell from 67 to 72 that took a 3 sp it will have the right size hole the ring was around 40 bucks

__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
Beaumont4008


Uber Guru

Status: Offline
Posts: 3936
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

Carl Stevenson wrote:

Does that have the 4.68" hole for the transmission input housing? I thought the trucks had a bigger opening in them. I think the trucks were about 5" maybe?

 Yes they do I think it's 5-1/8 like Timbuk said you need an adapter for that truck bell housing To work correctly . 



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7796
Date:
Bellhousing Wanted For 11
Permalink  

I'd hold out for a 621 bellhousing.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
SD 396


Poncho Master!

Status: Offline
Posts: 1985
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

Sending you a PM Carl.

 



__________________
norontcan


Canadian Poncho Superstar!

Status: Offline
Posts: 6992
Date:
Bellhousing Wanted For 11
Permalink  

Are any of these worth pursuing?
www.kijiji.ca/v-transmission-drive-train/edmonton/chev-bellhousings/1416316012

__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2672
Date:
Permalink  

Carl I am using the truck bellhousing (bought for $25) in my '66 Acadian SD,11" CentreForce Dual Friction, 168 flywheel, coupled to a Borg Warner Super T10. Plus 25,000 of trouble free miles!

__________________
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7796
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

  • norontcan wrote:

Are any of these worth pursuing?
www.kijiji.ca/v-transmission-drive-train/edmonton/chev-bellhousings/1416316012

 I checked with the seller.  The 11" car bellhousing isn't a 621.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50251
Date:
Bellhousing Wanted For 11
Permalink  

Thanks for doing that Clint. Did he say what the casting number is?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7796
Date:
RE: Bellhousing Wanted For 11" Clutch
Permalink  

Carl Stevenson wrote:

Thanks for doing that Clint. Did he say what the casting number is?

casting # 464697, he says it's the same as 3899621.   I just looked at a few on ebay, they look the same as 3899621 to me.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Beaumont4008


Uber Guru

Status: Offline
Posts: 3936
Date:
Permalink  

From what I read about this 697 bell housing there are two types and it depends were the clutch fork pivot ball is located. If it's mounted in the top position of the mounting boss your good to go and if mounted in the lower position in the boss it puts the clutch fork in the wrong position .  This according to the four speed convention site.

 

image.jpeg



Attachments
__________________
1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Canadian Pontiac/Acadian/Beaumont Cars/Parts Wanted -> Bellhousing Wanted For 11" Clutch
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.