Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Interior Tech Forum -> Turn Signal switch and no signal lights
Post Info TOPIC: Turn Signal switch and no signal lights
zak404


Addicted!

Status: Offline
Posts: 104
Date:
Turn Signal switch and no signal lights
Permalink  

So I got my steering wheel all together after replacing the turn signal actuator, found the fuse had blown, replaced that and the signals lights worked a couple of times and now nothing! My 4 ways still work and the horn works, it seems now there is no power going to the  turn signal actuator cam where there was before. the wires are hooked in right and have a good connection.

So my question is do the turn signal switches go themselves and I am look at replacing that? that is all I can think that could be wrong and it is 50 years old?

Any help would be appreciated. 

 



__________________
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8231
Date:
Permalink  

check the plugs coming down the steering column maybe a connection there

__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

do your brake lights work? they also go through the column plug and turn switch.

__________________
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

I'm going to ask my usual question, do you have a wiring diagram for your car? It'd be in the shop manual.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
zak404


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

Oh yeah never thought to check the brake lights, I have a shop manual but electrical isn't my strong forte, could just use the tester lighter I guess.



__________________
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

I presume you're working on the car in your avatar. 1968 Beaumont?

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

Ok, I'll take a stab at this. Presuming you're working on something similar to my 1970 models. GM used the same color coding for many years.

The power for the signal lights comes through the flasher. Not the flasher on the fuse block, that's just for the hazard lights. There's a second flasher somewhere under the dash. Power comes to it on a 12 gauge pink wire, check to see you've got 12v on both sides of the flasher. The power leaves the flasher on a 18 gauge purple wire, going to 4th pin of the signal light harness, between the 18 gauge yellow & brown wires.


__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

The 12v on the 12 gauge purple wire comes from the ignition. It should also be present on the bottom pin in the middle of the fuse block (labelled IGN) when the ignition is on.



-- Edited by seventy2plus2 on Sunday 10th of March 2019 06:57:40 PM

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

seventy2plus2 wrote:

There's a second flasher somewhere under the dash. Power comes to it on a 12 gauge pink wire, check to see you've got 12v on both sides of the flasher. The power leaves the flasher on a 18 gauge purple wire, going to 4th pin of the signal light harness, between the 18 gauge yellow & brown wires.

  Flasher must be plugged in (to complete circuit)  and would need to probe the wires(plug). Just didn't want him unplugging the flasher as some would do.  Was thinking ground...but if brake lights work thumbsup.gif Could also take his Hazzard flasher out and plug into turn flasher plug....this would tell if the flasher is NFG.



-- Edited by hawkeye5766 on Sunday 10th of March 2019 11:54:09 PM

__________________
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

Yes, the flasher must be plugged in when checking the circuit as to why it's not working.

If not familiar with wire gauge sizes, a 12 gauge wire is larger than a 18 gauge wire. Kind of like shotgun gauges.

My money is that he's either got a bad flasher or it's become disconnected, or his turn signal switch is toast. Hopefully just a flasher.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
zak404


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

I must have a loose connection somewhere, took flasher out and put it back in. It seems to work again, but the brakes lights weren't working either but are now. The wiring in the column is getting brittle,I may change the column out in the spring. Thanks for the ideas!

__________________
Urban_suburban


Poncho Master!

Status: Offline
Posts: 1622
Date:
Permalink  

I had the same symptoms last summer in my 64 Chev. It was the flasher unit for the signals. swapped it with the one out of the emergency flashers to get me home and then replaced both

__________________

aMmAGLQU_1XEL45IwManXTh0UsX7ci_CicoBJ8GLu-t9Fo_Q4FMFTjyKMkM-Q3XIRW5V496_7Z243qoLqIesHOSpBBALdorUW7WQqAKQ29u06GtHXVk6csPDbz8PAaHpRQ=w1280

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
zak404


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

I had a fancy old man one in there that was very loud so I could hear ha ha

__________________
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

zak404 wrote:

I had a fancy old man one in there that was very loud so I could hear ha ha

 I rely on that when the dash indicator doesn't work....buy another loud one!biggrin



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Interior Tech Forum -> Turn Signal switch and no signal lights
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.