Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> I may have a rear spring installed wrong
Post Info TOPIC: I may have a rear spring installed wrong
ABC123


Uber Guru

Status: Offline
Posts: 3521
Date:
I may have a rear spring installed wrong
Permalink  

Installing my new shocks,

Thank you Mr Delco for the new hardware.

That's not always the case in aftermarket parts.

001a.jpg

My driver's side spring appears to be off location.

It has a bit of a curve and rubs on the frame pocket opening.

Original springs but I had then out when I added lift pucks on the trailing arms,

My guess, I didn't locate them properly when I put them back.

I assume the 1969 pockets are the same as this 67.

Does anyone know for sure ?

Looks like I need to spin the spring around to fit the seat ?

Hopefully it's not bent or cracked.

1967-1968-Chevrolet-Impala-Caprice-Nice-Solid-Frame-_57a.jpg

 

 

 



Attachments
__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Prefectca


Poncho Master!

Status: Offline
Posts: 1747
Date:
Permalink  

I have had to rotate the spring to move the rung of the coil away from the chassis.

Paul

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

Yes, they go in a particular way as there is a pocket (I think you can see a hole in the plate on the chassis) for the end of the coil to go in to. Did you have the rubber insulators in there too? They also go onto the spring one way.

When I re-did the steering suspension & brakes on my convertible a few years ago, I had to give me springs a bit of a turn after it was all together. Fortunately I had marked the outside of one of the coils (on each spring) with electrical tape so I knew where they should align.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

With the rear end in the air, shine a flashlight up and see it you can see the pigtail end. Loosen the cup on the control arm, fit a small pipe wrench in between two coils, turn and hook it on a coil. 

With a small extension pipe on the wrench, you should be able to shift/turn the spring until it's registered correctly. You'll know when it's right.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
Prefectca


Poncho Master!

Status: Offline
Posts: 1747
Date:
Permalink  

I should have looked at the picture. I was thinking of the a body springs without the pigtail. Sorry about that.

Paul

__________________
ABC123


Uber Guru

Status: Offline
Posts: 3521
Date:
Permalink  

cdnpont wrote:

With the rear end in the air, shine a flashlight up and see it you can see the pigtail end. Loosen the cup on the control arm, fit a small pipe wrench in between two coils, turn and hook it on a coil. 

With a small extension pipe on the wrench, you should be able to shift/turn the spring until it's registered correctly. You'll know when it's right.

 Yep,

Spun it clockwise and got a clunk.

Spun back a bit and it locked in.

The rubber isolators are up there with the tape I used to hold it in place temporarily.

Those spacer pucks are a pain to work with but they do the job keeping the car level.

Below you can see the shinny spot where it was rubbing.

About 3/4 of a inch space now between the frame and the spring.

007a.jpg

I would love to use the original shock hardware but the threads have seen better days.

003a.jpg

Thanks guys.

So much for a quick shock replacement.

I'll finish that tomorrow.



Attachments
__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
ABC123


Uber Guru

Status: Offline
Posts: 3521
Date:
Permalink  

Prefectca wrote:

I should have looked at the picture. I was thinking of the a body springs without the pigtail. Sorry about that.

Paul

 All advice is appreciated biggrin



__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

Glad you got her.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

He was just looking for attention Mark. He wanted some of you local guys to come and visit, maybe help him with the springs. I bet it's lonely being a Ford guy on a Canadian Pontiac forum...



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

That one heck of a nice Black ragtop Ford he's got.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

What are these spacer pucks you mention?

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
ABC123


Uber Guru

Status: Offline
Posts: 3521
Date:
Permalink  

seventy2plus2 wrote:

What are these spacer pucks you mention?

 My car has the wrong springs in the front.

It sat too high.

Before

69 with poverty caps.jpg

After

006ab.jpg1969convert2020.jpg

 

I first ordered 1969 wagon springs to pick the rear up.

They didn't do much other than make for a bumpy ride.

Spent time on Impala forums and came up with this,

spacers2.jpg

https://mcbayperformance.com/passenger-car/billet-rear-coil-spring-spacer-lift-kit-for-1965-1970-chevrolet-bel-air-biscayne-impala-caprice/

I didn't order these, I ordered a Global west product.

002a.jpg

Leveled the car right out.

Sits a bit high all around but I like it.

Mark has said in the past, that for B-bodies, it's a 3-1 ratio.

For a 3 inch lift, use a 1 inch spacer.

Harry's springs in London thought the best way was to cut the front springs.

But with these spacers, it's easy to go back, if you don't like it.

My next 69 Pontiac will be on the ground, like my first biggrin

69 GP1.jpg

 

 

 



Attachments
__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
ABC123


Uber Guru

Status: Offline
Posts: 3521
Date:
Permalink  

4SPEED427 wrote:

He was just looking for attention Mark. He wanted some of you local guys to come and visit, maybe help him with the springs. I bet it's lonely being a Ford guy on a Canadian Pontiac forum...

 Edited my self 3 times.

Let's just say,

Thanks for the help smile

 



__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> I may have a rear spring installed wrong
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.