Save 5% at Vevor and Support Canadian Poncho!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Body Tech Forums -> Tire clearance
Post Info TOPIC: Tire clearance
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Tire clearance
Permalink  

This is on my 65 canso sd. 
have correct rubbers on. One side is good other is tight and rubs Fender ever so slightly.  Can that be adjusted and how does one adjust that if you can?



Attachments
__________________
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

Rim backspacing. Do you know what your rim has for bs? Does your fender have the lower support brace on it???

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
66 Beau


Poncho Master!

Status: Offline
Posts: 1860
Date:
Permalink  

Is that the front or the back wheel?

__________________

_______________________________________
==|====|----B-E-A-U-M-O-N-T----|====|==

\__________________|________|____________________/

__\____O__________________|66BEAU|___________________O____/
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

66 Beau wrote:

Is that the front or the back wheel?

 Gotta be front......Now that I look I think I can see the fender brace bolt.



__________________
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Permalink  

Thats the front of each side. I dont recall what the back spacing was but I thought I had checked it they were correct. 



__________________
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Permalink  

The driver side is good. Sorry but I should have rotated the pictures. 
195/70R14 is tire size. 
odd that one side is fine.



-- Edited by canso65 on Thursday 1st of April 2021 06:01:29 PM

__________________
poncho62


Poncho Master!

Status: Offline
Posts: 1067
Date:
Permalink  

Just a thought, but have a look where your A frames attach to the body. May need shimming to move wheel ahead a bit. An alignment would be needed....

__________________


Hanover, Ont

Ontario Rodders Forum
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8240
Date:
Permalink  

measure wheelbase to start,center to center see what u get

__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50256
Date:
Permalink  

canso65 wrote:

The drive side is good. Sorry but I should have rotated the pictures. 
195/70R14 is tire size. 
odd that one side is fine.

 My 65 Canso SD had the same issue. When I got the car it was extremely original, 1 owner car, 43,000 miles. As soon as I put on a 6" rim the tire rubbed at the front on one side. 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Permalink  

So Timbuk, I measured center to center and it was 110 (which is correct) on the clear side and 110.5 on the tight side. That half inch would do it. Is there a way to adjust that?

__________________
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7798
Date:
Permalink  

canso65 wrote:

Thats the front of each side. I dont recall what the back spacing was but I thought I had checked it they were correct. 

 Ok, it's the front wheel on each side.    Is it rubbing on the forward part of the wheel opening, or the rear?



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50256
Date:
Permalink  

That's the forward part. The bolt head you can see is the bolt that holds the small brace to that supports the bottom of the fender.

When mine did this I put a small adjustable spring jack in each front spring and cranked it up ever so slightly. That totally eliminated the problem

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Permalink  

So like a coil spacer Carl?



__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50256
Date:
Permalink  

Yes, I'll see if I still have some of those and post a picture if I do.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
canso65


Addicted!

Status: Offline
Posts: 134
Date:
Permalink  

Thanks (again!) Carl



__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50256
Date:
Permalink  

I know I have one or two of those left but I can't find them. And so far, I can't find a picture online. I'll keep trying though.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

I just made up a "new" longer fender brace. Think it was about 3/8 longer. Solved my rub problem and no one has ever noticed......

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50256
Date:
Permalink  

hawkeye5766 wrote:

 and no one has ever noticed......

 I did, I didn't want to say anything..................biggrin   

 

Just kidding!



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Body Tech Forums -> Tire clearance
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.