Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> Wire gutter?
Post Info TOPIC: Wire gutter?
Wagon


Addicted!

Status: Offline
Posts: 104
Date:
Wire gutter?
Permalink  

On my 65 6 cylinder rad support there was a plastic flat gutter that held wires crossing over the top from one side to the other.  

It is held on to the support by 4 mounting hex head screws.  The plastic has long since vanished and am unable to 

find anything in any parts catalogue.  What is the correct name for this part and any idea where repro available?



__________________
nuts, bolts, washers, and beer.
forget that, except for beer
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4472
Date:
Permalink  

Its only on canadian 1965 chevelles and beaumonts.  US cars never had it.   Not reproduced at all.  I think its the same as the canadian pontiacs in 65 66.  Same holds true for them,  only in canada.   They are always damaged, cracked, and broken around the screws.   try to find one on a 65 66 canadian pontiac if you need one,  would probably be easier than trying to find a beaumont.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50207
Date:
Permalink  

beaumontguru wrote:

  try to find one on a 65 66 canadian pontiac if you need one,  would probably be easier than trying to find a beaumont.

 Oh boy and good luck with that too, they're always broken and brittle. 

Also 65-66 Canadian built full size Chevy used it as well.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Wagon


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

thanks, I used one on my 68 chevy 1/2 ton resto so maybe can get another of those and mod to fit?
What did the US chevelles use?

__________________
nuts, bolts, washers, and beer.
forget that, except for beer
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50207
Date:
Permalink  

The harness didn't run across the top, it ran down lower on the US cars. It's weird but true.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Pontiacanada


A Poncho Legend!

Status: Offline
Posts: 20744
Date:
Permalink  

On '64 Parisiennes it ran under the top channel of the rad support ... no plastic gutter.

How long is the gutter Chris? I might have something.



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.

BC108


Member

Status: Offline
Posts: 18
Date:
Permalink  

Try
Auto Metal Direct W-160
RestoParts OPG CHV2350
OER 3864327

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Wagon


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

Sorry for long delay replying!  I was wrong there were 4 screws attaching it on top of rad support and 2 further out on the inside (engine) side of the top

crossmember of the support.  They have larger 3/4 inch washers under the metal screws.  I will attach 2 poorly lit photos.



Attachments
__________________
nuts, bolts, washers, and beer.
forget that, except for beer
Pontiacanada


A Poncho Legend!

Status: Offline
Posts: 20744
Date:
Permalink  

So it is quite long. I only have very short plastic ones that were on a '64 Parisienne firewall (as per this picture).

Bilder 2011 153.jpg



Attachments
__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.

beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4472
Date:
Permalink  

One option is to find a 67-72 truck one.  they use a very similar long gutter accross the entire width of the rad craddle as well.   Its usually in decent shape when you find one used.   its better than nothing anyway!



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
Wagon


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

I think that is the way to go! The 67-72 has lots of length and if too long easily whittled!
Restoration is coming along well. Just at the "where to stop" point. Gutted the interior and found
a few spots of floor concern. Heel of accelerator foot, middle cross brace under rear seat, and spare
tire compartment in rear. Not terrible but need replacing! And only 56 years old!

__________________
nuts, bolts, washers, and beer.
forget that, except for beer
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50207
Date:
Permalink  

That sounds pretty good considering how most of those cars look today, if they are not already crushed.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
ROSIES CAR


Addicted!

Status: Offline
Posts: 390
Date:
Permalink  

The gutter looks like this one, in case anyone has a spare and needs a reference picture. Its not perfect but I have never seen one that is. They are usually broken and cracked everywhere. This one is not for sale as I need it for my car. 



Attachments
__________________

65 SD Convertible
Wagon


Addicted!

Status: Offline
Posts: 104
Date:
Permalink  

Awesome those photos will certainly come in handy! I have ordered a new hood to cowl weatherstrip am sure I can adapt the old one
to act as the wire gutter across the rad support! Should work just fine. Your 65 SD Vert is a beauty!

__________________
nuts, bolts, washers, and beer.
forget that, except for beer
Fake68


Guru

Status: Offline
Posts: 671
Date:
Permalink  

Looks like a relatively easy part for a 3D printer.

__________________

72 Nova SS - Minitubbed
70 Nova SS - #'s L-78 Bench Stick
68 Acadian SS clone - factory air
67 Chevelle rag - SS 427 clone

gtodrive


Guru

Status: Offline
Posts: 736
Date:
Permalink  

Ebay has reproductions of the '67-'72 Chevy truck front gutter:

https://www.ebay.ca/itm/-/164351520354?etaf=1&etafElem=scShare_emailId1&tp=1622575979.51



__________________
'69 427 2+2 Convertible
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> Wire gutter?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.