2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: "Maintenance Ramp" recommendations?
MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:
"Maintenance Ramp" recommendations?


Recently I developed an exhaust leak on one of the cars.  Since I don't have a garage with a hoist, and don't really want to pay for a shop to do a sub-standard repair job on it, I figured I should just get a set of ramps to give me clearance to get under the car (and a set of wheel chocks to keep it from rolling when on the ramps).

I started looking online thinking I'd find a set of steel ramps, and found that there are now a number of plastic or resin ramps out there that are spec'ed for fairly high loads (like 12,000 lbs for example).  So, I realize that I should trust the spec, but still the idea of getting under a car supported by plastic ramps spooks me a little.

Maybe I'm being silly, but does anybody here have any experience with them, and if so are there any brands that you would recommend?  Like, are the Crappy Tire Motomaster brand ramps alright, or should I go for the Rhyno ones that seem to be popular?  Or should I stay away from them entirely?  I've seen people building ramps from wood online, which seems like a good alternative, but I'm kind of busy these days and don't want to take the time to build a set.

Just wanting to collect some thoughts on the matter.  Thanks in advance.



__________________


A Poncho Legend!

Status: Offline
Posts: 26765
Date:

I have been using a set of plastic ramps for years without any issues. They are ribbed underneath. Mine are rated for 2000lb each and made by "Rhino Ramps". I've had dozens of vehicles on them and they are quite stable.

Ramp2.jpg

ramp3.jpg

Ramp1.jpg

 



Attachments
__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Canadian Poncho Superstar!

Status: Offline
Posts: 5278
Date:
RE:


I trusted the 12,000 lb rating and bought the crappy tire set on sale last year. Have used numerous times, good for oil changes etc and easier than jack stands. They have stops already built in but I use blocks behind bay wheels too. They are light and easy to store.

My Pontiac weighs say 4000, Tacoma 4600, one axle is maybe2500-3000lbs tops. 



__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic

MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:
RE: "Maintenance Ramp" recommendations?


Thanks Todd and Don!  I should realize that they wouldn't be selling them if they were regularly collapsing and hurting people, but it really helps to hear (read) the voices of experience!

I'll pick up a set today and get on the repair.  smile



__________________


Poncho Master!

Status: Offline
Posts: 1685
Date:
RE: ramps


I have a 12,000# set of rhino ramps and they work well with my GMC 2500HD. The ramps are 12,000 per pair and should be used on asphalt or concrete. I think the ramps would be damaged and/or unsafe if used on the ground. Paul



__________________


Poncho Master!

Status: Offline
Posts: 1659
Date:
"Maintenance Ramp" recommendations?


[video=https://m.youtube.com/watch?v=WUXrGrrVeIU]

 

https://m.youtube.com/watch?v=WUXrGrrVeIU

 

Im waiting till Canadian tire has the sale on them..
But just dont do this (not me)



-- Edited by mike667 on Monday 15th of August 2022 11:14:34 AM

__________________


Poncho Master!

Status: Offline
Posts: 1685
Date:
Oops


There was a video on YouTube years ago with a guy trying to drive a pickup onto four ramps at the same time. He underestimated the power needed to get up four ramps and failed to stop in time and drove off of the end of the ramps. The back of the ramps tipped up and he did some body damage. Paul



__________________


A Poncho Legend!

Status: Offline
Posts: 48633
Date:
RE: "Maintenance Ramp" recommendations?


I would think a good pair of ramps with a pair of jackstands under as a safety should be pretty secure.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Canadian Poncho Superstar!

Status: Offline
Posts: 5278
Date:

4SPEED427 wrote:

I would think a good pair of ramps with a pair of jackstands under as a safety should be pretty secure.


 That's what I do with the ramps. If using the stands, I'll leave the jack under, just touching the lift point, in case the stands fail. Phobias.



__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic



Poncho Master!

Status: Offline
Posts: 1685
Date:

A video about Rhino ramps. 

https://youtu.be/2U0oCmSirM0



-- Edited by Prefectca on Monday 15th of August 2022 11:58:20 AM

__________________


A Poncho Legend!

Status: Offline
Posts: 48633
Date:

DonSSDD wrote:
4SPEED427 wrote:

I would think a good pair of ramps with a pair of jackstands under as a safety should be pretty secure.


 That's what I do with the ramps. If using the stands, I'll leave the jack under, just touching the lift point, in case the stands fail. Phobias.


 Same here. Always two separate means of supporting the vehicle. My wife gets very concerned if I'm lying under a car that's jacked up, even when it's the jack and often 4 jack stands under there.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

DonSSDD wrote:
4SPEED427 wrote:

I would think a good pair of ramps with a pair of jackstands under as a safety should be pretty secure.


 That's what I do with the ramps. If using the stands, I'll leave the jack under, just touching the lift point, in case the stands fail. Phobias.


This is my plan - drive up on the ramps and then put the floor jack up under the front lift point until it just starts to take some weight (and chock the rear wheels).  I figure if something wonky happened with the ramp, the jack would be enough of a redundant support to at least give me the chance to get out from under.

I'm curious how you use jack stands in that case as the ramps are at a set height and (my) jack stands are not infinitely adjustable in that they have teeth that give me a number of height settings but will not likely be close enough that there isn't a gap between the support points and the jack stand when up on ramps.

As far as a surface goes, I just got the driveway paved last year so I have a nice straight surface to work with.

Thanks for all the advice and opinions!



__________________


A Poncho Legend!

Status: Offline
Posts: 48633
Date:
RE:


Because the car is on an incline I go as far forward on the car as I can with the stand, then slide it back until it touches .



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:
RE: "Maintenance Ramp" recommendations?


Ah... makes sense, Carl.  I'm working on a "newer" car with set lift points, so that's not available to me.

Thanks!



__________________


Uber Guru

Status: Online
Posts: 3182
Date:

I use my Rhinos a lot.

The car trailer I have been dragging around this summer has quite the steep angle for loading cars.

Maybe not recommended but this works biggrin

002a.jpg



Attachments
__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 



A Poncho Legend!

Status: Offline
Posts: 48633
Date:

MC wrote:

Ah... makes sense, Carl.  I'm working on a "newer" car with set lift points, so that's not available to me.

Thanks!


 Could you not put a shorter stand under that pad and then some blocks under the stand?



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Canadian Poncho Superstar!

Status: Offline
Posts: 5278
Date:

MC wrote:

Ah... makes sense, Carl.  I'm working on a "newer" car with set lift points, so that's not available to me.

Thanks!


 Catching the car from falling on you or causing damage to the bottom of your car MC?



__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic

MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

ABC123 wrote:

I use my Rhinos a lot.

The car trailer I have been dragging around this summer has quite the steep angle for loading cars.

Maybe not recommended but this works biggrin

002a.jpg


 There's a vote of confidence I can get behind!  smile



__________________
MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

4SPEED427 wrote:
MC wrote:

Ah... makes sense, Carl.  I'm working on a "newer" car with set lift points, so that's not available to me.

Thanks!


 Could you not put a shorter stand under that pad and then some blocks under the stand?


Could probably rig something up, but I think I am more comfortable using my 3-ton floor jack as a redundant support.  I trust the jack to lift the car, and I can use the jack to partially support the car so there is no slack or weird angles.  If in some unlikely case the 16,000 lb rated Rhinos I just bought were to fail, there would be no movement and therefore no risk of slipping off of a jack stand, since the floor jack would already have a small load on it. 

I don't like to say, but I'm not really a fan of jack stands as they can be prone to slip, tip, or buckle if the load becomes off centre.  Blocking them up (in my mind) just creates another variable that can go wrong.

It really all comes down to what you are comfortable with, I suppose.  Either of those support methods would be fine on their own, so both should provide a reasonable overlap.  IMHO.



__________________
MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

DonSSDD wrote:
MC wrote:

Ah... makes sense, Carl.  I'm working on a "newer" car with set lift points, so that's not available to me.

Thanks!


 Catching the car from falling on you or causing damage to the bottom of your car MC?


 See my post above.  I'm not overly confident that a jack stand will catch a car in the event of it starting to fall.  It would be hard to predict the loads if a ramp were to fail.

That said, I feel somewhat confident that 16,000 lb rated ramps won't fail under the weight of a car.  Whatever extra is done is just for peace of mind - jack stands or a floor jack are better than what most people would use, which would be nothing. 



__________________
MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

Thanks again to everybody who offered their opinions and advice.  All is greatly appreciated.

I feel that my concerns have been addressed!  smile

Another suggestion I picked up on in one of the videos posted was to put a rubber mat under the ramps to prevent them from slipping when you are driving up on them.  So I bought some mats that were on sale at the same time for this purpose.  We'll see how it goes.



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 7418
Date:

NAPA often has their ramps on sale.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop
72 GMC Sierra

 

 



Guru

Status: Offline
Posts: 887
Date:

I got one of these jack systems, call it a sort of poor man's hoist. Don't need a lot of garage height, lifting around 22 inches and takes up little space when collapsed. Best money I ever spent for doing tire swaps etc. Costco around $1,400.

https://www.quickjack.com/



__________________

65 Custom Sport Convertible

Southern Alberta

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.