Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Interior Tech Forum -> Does anyone know how to adjust window angles?
Post Info TOPIC: Does anyone know how to adjust window angles?
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Does anyone know how to adjust window angles?
Permalink  

Hey there. I'm also dismantling doors and rear walls to lube all window rollers and rails and faced one issue. One of the windows seems rubbing against the front rail on the rear panel. Tightening the top two nuts is moving the rail with the glass all together. 

Does anyone know how I could move the glass away from that metal element? It only happens when the window is more open.



Attachments
__________________

1965 Parisienne Custom Sport

Burlington, ON
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50051
Date:
Permalink  

I'm not sure if I understand your statement exactly but are you aware that the top 2 nuts are on threaded studs that can be adjusted in and out, not just moved around in the horizontal/vertical slot? If you loosen the nut, you can change the length of the stud by putting a flat screwdriver in the exposed end of the stud and that should move the window in or out. It will pull the window in towards the inside of the car if you turn the stud clockwise, then tighten the nut to hold it in place. 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
LT1Caddy


Poncho Master!

Status: Offline
Posts: 1007
Date:
Permalink  


You should purchase a Fisher Body guide book. It shows all the adjustments for nearly everything on the car..windows, doors , bumpers etc.

Check with 4speed 427, he may have a lead on one..

__________________
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

The issue is - those studs and nuts regulate window rail distance from the panels, so the distance of the window to the rail is not changing. On the images it shows marks on the rubber and chrome from the rail.



-- Edited by Neilvermilion on Sunday 2nd of April 2023 12:22:32 PM

__________________

1965 Parisienne Custom Sport

Burlington, ON
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50051
Date:
Permalink  

Are the rollers in good shape?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

Almost all of them. One seems missing it's half, but it doesn't prevent any movement now:)

__________________

1965 Parisienne Custom Sport

Burlington, ON
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

Oh, seems my previous reply didn't go through.
The issue is fixed. I screwed all the belts in and out and aligned the window. The most influential were the bottom two. Also the window was too far to the back.
Thanks everyone.

__________________

1965 Parisienne Custom Sport

Burlington, ON
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Interior Tech Forum -> Does anyone know how to adjust window angles?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.