Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Built a 1969 Master, Hold off and Distribution block line jig.
Post Info TOPIC: Built a 1969 Master, Hold off and Distribution block line jig.
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Built a 1969 Master, Hold off and Distribution block line jig.
Permalink  

For my 69 disc conversion.

If you have the parts, and like to do you own lines, then I think a simple mock up jig is a way to make it easier to pre fab them close to the correct shape and length.

To me it's preferable than having to spend time in and out of the engine compartment. Plus it's a good way to visualize how they will route.

The Dist. block as shown in the picture is actually facing opposite as it should, and was eventually turned 90 degrees on the base. The estimated placement between the block and the master was figured from actual measurements of the 69.

 

And yes, I know it's a 70 Hold off, but I already had it and it's rebuilt

jig.jpg

 



Attachments
__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50193
Date:
Permalink  

Boy, excellent idea. Last job I did was leaning over the fender test fitting the line over and over and over...



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
oshawacliff


Poncho Master!

Status: Offline
Posts: 2252
Date:
Permalink  

And then forgetting to put the nut on the nice line you are so proud of.

 



__________________

Cliff

Done Hurryin

Like the larger type for my eyes. 

 

 
68sd396rag


Poncho Master!

Status: Offline
Posts: 1026
Date:
Permalink  

I saved all the old lines and just made new ones from the old originals-saved me doing all this.Angles and everything look correct above-the 69 and 70 metering valves were always sideways like shown above

__________________
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Permalink  

Did 1969 ever come with the "no nut" hold off ?

I've seen pictures of 69's with the 70 style. Maybe a add on?

 

I think you sold me the hold off John.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Permalink  

Here's basically how it measures in the 69. With the line loops, being exact isn't really required. Just close.

frontrs.jpgside.jpg

 



Attachments
__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27398
Date:
Permalink  

Or cheat like I did. I bought the complete pre-bent set of lines for my 69 Pontiac from inline tube .
68sd396rag wrote:

I saved all the old lines and just made new ones from the old originals-saved me doing all this.Angles and everything look correct above-the 69 and 70 metering valves were always sideways like shown above

 



__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Permalink  

Canadian Poncho wrote:
Or cheat like I did. I bought the complete pre-bent set of lines for my 69 Pontiac from inline tube .
68sd396rag wrote:

I saved all the old lines and just made new ones from the old originals-saved me doing all this. Angles and everything look correct above-the 69 and 70 metering valves were always sideways like shown above

 

I'll always at least try to make them myself. I find it very enjoyable doing the fine work like this.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27398
Date:
Permalink  

I understand. I had to replace all the brake lines as soon as I bought the Laurentian and wanted to get her on the road. The brake fluid was like jello. Surprised I survived the trip home on the 401 when I bought it!


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
ABC123


Uber Guru

Status: Offline
Posts: 3556
Date:
Permalink  

Hey Mark, can you confirm that the distribution block is machined cast ?

__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Permalink  

I believe it's cast iron. Maybe cast steel.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
ABC123


Uber Guru

Status: Offline
Posts: 3556
Date:
Permalink  

I am not sure but it may be possible that Oshawa cars were cast while other plants used the brass.

__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10616
Date:
Permalink  

Sorry Randy, I was fixated on the valve.

The dist block is machined steel.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
ABC123


Uber Guru

Status: Offline
Posts: 3556
Date:
Permalink  

I was at London Brake and Steering yesterday, for a new nut, for my pitman arm.

They told me that an original brake block, that is made of steel, is better than a new brass unit.

So, I will clean up the original and use it.

__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Built a 1969 Master, Hold off and Distribution block line jig.
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.