Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> center force clutch
Post Info TOPIC: center force clutch
tmfbi69


Veteran Member

Status: Offline
Posts: 50
Date:
center force clutch
Permalink  

Hi Guys,Has anyone installed a Centerforce II Clutch in anything . I put one in my car this year, Pedal pressure is very easy(compared to my old Hays Competition
Borg&Beck style) It seems to hook up OK,but it hangs up at higher rpm(above7000)
I know the old diaphram clutches  did the same thing. I thought I missed a gear ,but the pedal stayed to the floor.I payed about 350$ for it but it only has 200kms on it, but this is not acceptable.Has anyone had this trouble??????
I thought this was a good set up for streetcars,but I am very  P O ed.
              Thanks Tony M.


__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2672
Date:
Permalink  

I used the Centre Force Dual Friction 11" and have had over 20,000 miles of trouble free use. Did you follow the instructions for break in ? (mine said no "abuse" until 500 miles) Did you check or resurface the flywheel for straight and the correct gap ? Check the instructions, there is probably a number you can call for technical advice, I am guessing the gap may need adjusting. Only suggestions.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
tmfbi69


Veteran Member

Status: Offline
Posts: 50
Date:
Permalink  

I tried to follow (most) of the instructions,according to the sheets provided.
At low RPM it works fine ,But..........

__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2672
Date:
Permalink  

May need a little more use for break in period.

__________________
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

ARCADIAN wrote:

I used the Centre Force Dual Friction 11" and have had over 20,000 miles of trouble free use. Did you follow the instructions for break in ? (mine said no "abuse" until 500 miles) Did you check or resurface the flywheel for straight and the correct gap ? Check the instructions, there is probably a number you can call for technical advice, I am guessing the gap may need adjusting. Only suggestions.


           I have the same   works mint    I have never taken it over 6500 confuse

 



__________________

 
tmfbi69


Veteran Member

Status: Offline
Posts: 50
Date:
Permalink  

I have put a lot of clutches in this car over the decades and it seems that if they dont work
from the start they never work right.Everything in there is new ,or re-surfaced. even did
an M20 over,for the street . I will figure it out eventualy, or put a new Gold Hays in again
Thanks for your help, Tony

__________________
2drpost


Uber Guru

Status: Offline
Posts: 3463
Date:
Permalink  

had a car years ago, with a stock clutch, diaphram fingers would stick over center at higher rpm.
i adjusted more freeplay in the pedal so it wouldn't push the fingers as far/farther than neccesary.

but yes, a new, performance, brand name clutch should not be doing this.

__________________

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27417
Date:
Permalink  

How did the show go Tony? I am sorry that I couldn't make it. Any photos?

Todd

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
tmfbi69


Veteran Member

Status: Offline
Posts: 50
Date:
Permalink  

Hey Todd, We had over 200 cars,also a wildlooking Peterbuilt custom ,a few blown dragsters
a bunch of other drag cars ,a few roudy rounds,tons of hotrods, customs,
and classics. Perfect weather,lots of food&drink,next year should be even better.
Pictures are coming,soon. see you later. Tony

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> center force clutch
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.