Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Don't Blow a GASKET but


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Don't Blow a GASKET but


I removed my left side header, today..  I looked like, it would not have room, to get gasket cleaned up, as header is tight to steering box.. After I loosed collector and header, it (header) actually moved down and away!   

I have read on other forums, that "copper" and "aluminum" and reg "Fel Pro" are the favorites of some..  I checked with Car Quest, they have Mr Gasket in stock...


Nov 17 001.jpg

Nov 17 002.jpg

Nov 17 003.jpg

Nov 17 004.jpg

Nov 17 005.jpg

Nov 17 006.jpg

Nov 17 007.jpg

Nov 17 008.jpg

__________________

 



A Poncho Legend!

Status: Offline
Posts: 49986
Date:

Was #1 cylinder bottom the leaker?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

no   you can see in last photo  it was #7 top

__________________

 



A Poncho Legend!

Status: Offline
Posts: 49986
Date:

Ok, I saw you were showing shots there.

Doesn't it look like the head bolt under number one has a layer of soot too?

Sorry, I'm must not a header guy for exactly the reason you are showing us now.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

you have a good eye!    the #1 is broke at bottom, when I pulled it out    I was think of getting rid of headers, but will see how new gasket works..  My Chief has headers from 1991 and are nice and tight and no leaks..   these headers are Hedman long tube, and they came with car...  I thought manifolds would be ok, but no sense spending money yet....  I do think we are putting a lot of perforance stuff on cars, that we can't use anymore ( I mean out on open roads)  and the drags are a 8 hour sit in the sun for 2 passes, affairs..

__________________

 



A Poncho Legend!

Status: Offline
Posts: 20240
Date:

The worst set of heasers for burning gaskets I had were on my Monza, now that was a real job but I just finessed it every time. Usually had to loosen the engine and jack it up a bit. They were three pieces on the left flange. I see your's are two pieces. I think that leads them to loosening because they are not all tied together and they flex there. In fact I got to the point where I only changed part of the gasket where it was burned and loose. Once I fgured that out they never got loose again.

You don't have to spend a lot to get cast iron manifolds, you can pick them up at every swap meet, clean them up and get them powder coated or paint them.

I prefer cast iron factory mainfolds because I don't speed or race plus they are quiet too. At my age I don't like too much noise.

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 




A Poncho Legend!

Status: Offline
Posts: 35601
Date:





 At my age!  rofl.gif rofl.gif              I don't like too much noise.




 



__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Guru

Status: Offline
Posts: 671
Date:

Use stock manifold gaskets and cut the bolt holes so they are sloted and slide in they last twice as long as header gaskets and you can change the one at a time in the future trust me it works great being doing it for year and never had a problem!

__________________

Im back new shop is kicking A$$

 



Poncho Master!

Status: Offline
Posts: 1560
Date:

73SC wrote:
At my age I don't like too much noise.

Oh really? Don't ever ride with me then. I keep these in the glovebox for passengers.
rofl.gif



 



__________________



         www.67HEAVEN.com
Re-thinking the entire site design



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Oh Ya?     how about a camera video of the sounds?   hmmm   wait.  I had a Corvette with side pipes wink  and it was headacke city for the first week   OK  I believe you!!! 



__________________

 



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

73SC wrote:

  They were three pieces on the left flange.

 I see your's are two pieces.confuse  THEY ARE?    C2

 I think that leads them to loosening because they are not all tied together and they flex there. ??? C2


         THE GASKETS ARE 1 PC  THE FLANGE IS 1 PC   I DON'T FOLLOWnerd.gif

 



__________________

 



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

The headers are ROUND port  and the 461 1964 heads are ????  The Mr Gasket gasket are rectanglar    hmmm   I never used anything but rectuanglar before...



__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


A Poncho Legend!

Status: Offline
Posts: 49986
Date:

Not sure why they do it that way but I think that is not uncommon. Seems strange, why not make it the right way?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

thanks for dropping in..handshake.gif.   I can order gaskets for tomorrow .  I used my glasses and a light!  and think the heads are round...  Are they?  and will the 'square" gasket do?  this is probably my first set of double hump heads... hmm

__________________

 



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Nov 17 007.jpg

this is header side and they are round, as you can see  

__________________

 



Uber Guru

Status: Offline
Posts: 3830
Date:

427carl wrote:

 

Oh Ya?     how about a camera video of the sounds?   hmmm   wait.  I had a Corvette with side pipes wink  and it was headacke city for the first week   OK  I believe you!!! 

 


Same here Carl. I had a 65 convert. 327, side pipes,noisy , but i was young so i didn't mind. Then a few years later, 69 coupe 350 Hooker headers/sidepipes with no baffles. that was too much. I don't know how you do it Bob. i would be deaf now if i kept driving them!

 



__________________

Drifting offshore is a fine way to spend a day!!



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

eeluddy wrote:

427carl wrote:

 

Oh Ya?     how about a camera video of the sounds?   hmmm   wait.  I had a Corvette with side pipes wink  and it was headacke city for the first week   OK  I believe you!!! 

 


Same here Carl. I had a 65 convert. 327, side pipes,noisy , but i was young so i didn't mind. Then a few years later, 69 coupe 350 Hooker headers/sidepipes with no baffles. that was too much. I don't know how you do it Bob. i would be deaf now if i kept driving them!

 



Back in the 'day" Earl,  we used to drive 100 mph all the time ..   now just Bob does  lol

 



__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


A Poncho Legend!

Status: Offline
Posts: 49986
Date:

The factory exhaust port on 'fuelie" heads is not round.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 35601
Date:
RE: Don't Blow a GASKET


Thank you!   The heads "are" 64 fuelie double hump, original to the motor...I got a brighter light and stronger glasses, and the ports are square. 

The gasket was round port to match the Header... Looks like the gasket I got today, will work better matching to the head, instead of header...   thanks for confirming that..   I will add something nice, to the lump of coal, I was sending for CHRISTMAS   Carl too

__________________

 



Poncho Master!

Status: Offline
Posts: 1691
Date:
RE: Don't Blow a GASKET but


TINY wrote:

Use stock manifold gaskets and cut the bolt holes so they are sloted and slide in they last twice as long as header gaskets and you can change the one at a time in the future trust me it works great being doing it for year and never had a problem!



Exactly what Tiny said. I've found these to be the best solution as well.

 



__________________

Barry -

2 x 68 Beaumonts, 1post, 1 hardtop (projects)

2x 65 Chevelle 300 deluxe (projects)

69 SS396 300 deluxe post

 

 

 

Fredericton,NB

 



Poncho Master!

Status: Offline
Posts: 1921
Date:

i might have some headers for sale soon. now that the car is lowered i might not be able to keep them on. headman headers for an X frame car, used for three months. its a shame, cause i always wanted headers on a car and never did it till now, oh well.

__________________
1959 El Poncho!!


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

68post wrote:

TINY wrote:

Use stock manifold gaskets and cut the bolt holes so they are sloted and slide in they last twice as long as header gaskets and you can change the one at a time in the future trust me it works great being doing it for year and never had a problem!



Exactly what Tiny said. I've found these to be the best solution as well.

 



Sounds better...    have you ever asked a parts guy for them?  They come in a rebuild kit and are almost never used..   I installed my new square port gasket to day and got the car sounding 1000 times

louder!!! blehbleh    want to buy some headers?



__________________

 

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Guru

Status: Offline
Posts: 962
Date:

Carl,

You don't by chance have a bent header flange do you??? I had an old pk up where it was bowed in the middle. I doubled up the gasket in the center, and never had a problem after that. confuse  Just a thought.......

__________________

John

1972 Pontiac Lemans (daughter's car) 
2005 Pontiac Grand Am
2004 Ford Explorer Sport Trac

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.