Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Disc Brake Fluid


Guru

Status: Offline
Posts: 611
Date:
Disc Brake Fluid


I just installed disc brakes on the front end. What type of type of brake fluid should I be using? 

DOT-3 or 4 or 5?

 



__________________
"you can't burn out, if your not on fire" -Jim Morrison


Guru

Status: Offline
Posts: 613
Date:

Personally, I now use DOT-3 synthetic...get it at the local UAP/NAPA.

*********************************************************

http://importnut.net/brakefluid.htm

Water absorption and corrosion:
The big bugaboo with DOT 3-4 fluids always cited by silicone fluid advocates is water absorption. DOT 3-4 glycol based fluids, just like ethylene glycol antifreezes, are readily miscible with water. Long term brake system water content tends to reach a maximum of about 3%, which is readily handled by the corrosion inhibitors in the brake fluid formulation. Since the inhibitors are gradually depleted as they do their job, glycol brake fluid, just like anti-freeze, needs to be changed periodically.

DOT-5 contains silicone:
If silicone is introduced into an older brake system, the silicone will latch unto the sludge generated by gradual component deterioration and create a gelatin like goop which will attract more crud and eventually plug up metering orifices or cause pistons to stick. If you have already changed to DOT 5, don't compound your initial mistake and change back. Silicone is very tenacious stuff and you will never get it all out of your system. Just change the fluid regularly. For those who race using silicone fluid, I recommend that you crack the bleed screws before each racing session to insure that there is no water in the calipers.

New developments:
Since DOT 4 fluids were developed, it was recognized that borate ester based fluids offered the potential for boiling points beyond the 446F requirement, thus came the Super DOT 4 fluids - some covered by the DOT 5.1 designation - which exhibit a minimum dry boiling point of 500F (same as silicone, but different chemistry).



__________________
owned ten 1967 Beaumonts, over 3 decades
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Canadian Poncho Superstar!

Status: Offline
Posts: 5990
Date:

For easily over 20 years now, i have used only silicone brake fluid in ALL my cars. You could not pay me to use that regular junk in my brakes. It is well worth the minor extra cost for the silicone stuff over the crappy regular stuff. When i started using silicone brake fluid, you had to win a lottery to buy it but now it is very reasonable. There are so many pluses to using it and so many minus's to using the other junk. Cheers. George.



__________________

1957 Pontiac Pathfinder Deluxe sedan restored 261 six

1974 Chevrolet Caprice Estate wagon low mileage original 400 V-8



Poncho Master!

Status: Offline
Posts: 2671
Date:

Valvoline dot 3/4 is a good product, I have it in both my Acadian and Chevelle

__________________


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

I use  Car Quest brake fluid   its in a black container     Its called  Brake Fluid 



__________________

 



Poncho Master!

Status: Offline
Posts: 1832
Date:

"Brake fluid" you say !

__________________

68 custom
68 deluxe
67 custom
67 SD convertible (1 of 1)
16 Colorado 4x4 Duramax

Long live the Canadian arrowhead >

 Edmonton,AB



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

yup     its seems good     I put some in my Yukon and its stops   biggrin



__________________

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.