Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 1962 window track problem.


Veteran Member

Status: Offline
Posts: 44
Date:
1962 window track problem.


My passenger side windows came off my 62 beaumont track and I can't seem to get it to stay on.

I'm having a hard time getting the the window crank and door handle off,I'm not sure where the clip is.prying it with a flat head screw driver has been no help. So far I have pushed the door panel off to the side,just enough to see the track. I've tried soldering the bottom of the windows witch is in cased in metal to the track but it came loose again! I was afraid to get too much heat on the window and have it shatter.

Anyone have any suggestions on how to keep my window on the track or at least get those Damn knobs off so I can see what I'm doing?

Thanks soo much.

Tony

 



__________________


Poncho Master!

Status: Offline
Posts: 1067
Date:

The handles are held on by little wire "C" clips. You pry the door panel away from the handle a bit and you can see it in there. There is a tool for that at any parts store, CTC etc

 

mQt11xWdAnQHivVpeANI1lg.jpg  mrAbc0iTV_sULneKn-fKY0w.jpg



__________________


Hanover, Ont

Ontario Rodders Forum

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Canadian Poncho Superstar!

Status: Offline
Posts: 5042
Date:

This is for a newer GM car but the clips are the same as your car.

Easy way.....wink

http://www.youtube.com/watch?v=jqv8A2jakOg



__________________


A Poncho Legend!

Status: Online
Posts: 50213
Date:

A Piston Ring or Princess Auto also will have the tool you need.

You need to have the crank handle pointing towards the tool side when you push the tool in to remove the clip. Don't try to go in behind the crank from the side opposite the handle, if you know what I mean.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Uber Guru

Status: Offline
Posts: 3025
Date:

that will be the case unless someone put the clip in backwards.
another trick to use is a piece of heavy string to wrap around the handle and catch the clip.


__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Veteran Member

Status: Offline
Posts: 44
Date:

Super great tips guys.I'm going to try em all!


__________________


A Poncho Legend!

Status: Online
Posts: 50213
Date:

The clip tool I've used forever-

DSCF0469.JPG


Correctly installed to remove clip (assuming the clip wasn't installed backwards!)

DSCF0470.JPG

Attachments
__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Uber Guru

Status: Offline
Posts: 3025
Date:

this might help

 

Scan.jpg



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Guru

Status: Offline
Posts: 902
Date:

....I just use a hard wire like from a manual choke cable, about 8" long, bend a small hook at the end , other end make a loop that your fingers can grab. Use a screw driver to pry the handle away abit and you can usually see the clip, hook the clip and just pull and it pops off.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.