Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Support Canadian Poncho -> Canadian Poncho Stainless Steel Laser Cut Keychains and Nameplates now available!
Post Info TOPIC: Canadian Poncho Stainless Steel Laser Cut Keychains and Nameplates now available!
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Canadian Poncho Stainless Steel Laser Cut Keychains and Nameplates now available!
Permalink  

This is a project we have been working on for quite a while. CP member Gayne Jacobs (firsdancebridalcars) has been working feverishly to produce two exceptional collectible Canadian Poncho Items. Gayne lives in New Zealand and with the help of the talented folks at Stainless Design of Hamilton, New Zealand, we are happy to announce the availablity of these two items.

First we have this exceptional Key Ring. Here is a photo of the Key Ring in it's initial design phase at Stainless Design:

LaserKeyRing.jpg

Once they were happy with the design a prototype was laser cut. Happy with the prototype, one hundred pieces were produced. Each piece had to be hand inspected and de-burred as needed. The result is fantastic!

Keyring1.jpg

Keyring2.jpg

Next I asked Gayne if the gang at Stainless Design could create a nameplate in the spirit of the original metal nameplates dealers would install on new vehicles back in the 50's and 60's. After much work they came out with this great looking nameplate!

 

Nameplate1.jpg

Nameplate2.jpg

 

The fine detail is incredible!

Namplate2.jpg

 

Each nameplate has four strong magnets to allow you to attach it to your toolbox, firewall or exterior sheet metal (I strongly recommend a thin piece of material (or something similar) be placed between the magnets and your paint to prevent scratches!). 

 

Nameplate4.jpg

Nameplate5.jpg

 

Both Gayne and myself have quite a bit of money invested in this project and we truly hope you will support our endeavor. We have tried to keep the cost as low as possible given the cost of materials, labour and shipping to Canada from New Zealand. 

Here are the costs of each item:

Key Ring : $24.00 Cdn plus taxes if applicable

Nameplate: $35.00 Cdn plus taxes if applicable

Shipping is a flat rate of $5.00 in Canada or USA if one item is ordered. PM me for a shipping quote if you wish to order more than one item or live outside of Canada/USA.

Quantities are limited to 100 Key rings and only 37 Nameplates.

Please note both of these items have sharp edges and should be kept away from children! We are not responsible for damage created to your vehicle due to improper installation!

You can use the handy Paypal "Add to Cart" button below to order. If you wish to pay by another method please PM me. 

We greatly appreciate your support!

  Todd and Gayne

 

 

Select Item:


Attachments
__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
eeluddy


Uber Guru

Status: Offline
Posts: 3830
Date:
Permalink  

Cool stuff guys! This will make a nice present for the Poncho lover. Pass the idea along, or better still just buy one!!!

__________________

Drifting offshore is a fine way to spend a day!!
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

Forgot to mention the nameplate would also look great on your toolbox!

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

Please put my name on one of each plus a new mug, and let's see if we can save you some money on shipping by getting a group buy out of Winnipeg.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Lefty


Uber Guru

Status: Offline
Posts: 3025
Date:
Permalink  

thanks they looks great, ordered one of each..



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8240
Date:
Permalink  

Carl Stevenson wrote:

Please put my name on one of each plus a new mug, and let's see if we can save you some money on shipping by getting a group buy out of Winnipeg.

 yes i would like to second that,how to pay altogether and ship together



__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
Lad820


Addicted!

Status: Offline
Posts: 349
Date:
Permalink  

As a frugal Winnipegger, I'll put an order in for the Key chain and mug. Would also like to be included in Carl's idea for saving on the shipping charges.

Perhaps Carl could open up a western distributorship. smile



__________________

'62 Pontiac Parisienne

'83 Datsun 200SX

Winnipeg, MB.
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

Perhaps those in the Winnipeg area could PM Carl with their needs and then Carl could send me a list. I think that would be the easiest for me. Is that ok with you Carl?

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
RDubya


Poncho Master!

Status: Offline
Posts: 2443
Date:
Permalink  

Sent my payment for a nameplate

__________________

Randy

1967 Beaumont Custom 4 dr survivor
1985 Firebird

2004 Montana shortie

2007 Uplander extended*newest addition to fleet*

 
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

Thanks guys!

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

Canadian Poncho wrote:

Perhaps those in the Winnipeg area could PM Carl with their needs and then Carl could send me a list. I think that would be the easiest for me. Is that ok with you Carl?




Sure, I can get the order all ready and then send it to you, they can pay you separately though (unless I'm just supposed to buy it for all of them!!!)

I would prefer to get it shipped to a Winnipeg address though so the guys can get their stuff sooner.

I have a busy winter ahead of me (at least my evenings and weekends) and it may not include a lot of extra trips to the city for coffee breaks etc.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
DrCAS


Guru

Status: Offline
Posts: 664
Date:
Permalink  

I had to have both...

:)

__________________
"Things work out best for the people who make the best of the way things work out." - Art Linkletter

1973 Pontiac Astre Panel Express
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
MarkV


Addicted!

Status: Offline
Posts: 121
Date:
Permalink  

Those keyrings look amazing, definitely ordering myself one!

__________________

'66 Pontiac Grande Parisienne 283 2speed glide

'70 Pontiac Bonneville 455(400) TH400

'75 Pontiac Grand Am 455 TH400
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

DrCAS wrote:

I had to have both...


:)




Great to see you here Bruce, it's been a bit!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

Only a handful of these items have been sold guys. Maybe I need to post this in separate forums? I wonder if some folks aren't seeing this thread.


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

I want to take the time tonight to make up two separate threads for a Winnipeg group buy for these items plus the mugs. Hopefully that will help some.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

Still lots of these items available guys.

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

Just bumping this up to remind you guys. This is a great way to support Canadian Poncho.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Terry G


Veteran Member

Status: Offline
Posts: 59
Date:
Permalink  

The nameplates look even better in person.

I choose to put mine in my grill, with the lighter colour of our car it didn't show up like it should on the paint.

Now to give it a good polish.

IMG_3394.jpg

 

 



Attachments
__________________

the 4 Dr HUD
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50225
Date:
Permalink  

Cool idea!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27425
Date:
Permalink  

The nameplate looks great there!

I need to sell 17 nameplates and 50 keychains to break even. I've sold 8 nameplates and 12 keychains so far. These dismal sales figures have put myself in a tight situation. I still owe SEVERAL hundred dollars to Gayne in New Zealand who fronted the costs of producing these items. Keep in mind I also still have to cover site costs. This can't go on for too long. 35 nameplates on a website of 4500 members should not be so hard to sell. Same with 100 keychains. Right now I'd be happy just to break even! So, for those of you who have NEVER contributed to the website, I ask you to consider the benefits you have received from Canadian Poncho, be it in finding hard to find parts and cars, selling your parts or car, or just getting good information on these great Poncho's.  Both Gayne and I were really excited to offer these items to members of Canadian Poncho. They were designed by enthusiasts for enthusiasts and the fact they were made in New Zealand made them (in our opinion) a little more special. Needless to say we are very disappointed with the poor response we have received. 

I do know I will be thinking long and hard before taking on another project like these items again. The financial strain is too much.

 






__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
firstdancebridalcars


Addicted!

Status: Offline
Posts: 203
Date:
Permalink  

Terry G wrote:

The nameplates look even better in person.

I choose to put mine in my grill, with the lighter colour of our car it didn't show up like it should on the paint.

Now to give it a good polish.

IMG_3394.jpg

 

 

 

Glad you're happy with the emblem. To make it stand out more perhaps you could put something coloured behind it. We hadn't thought about them going on the grills because there wasnt too much for the magnets to cling to. Just wondering if it would be an idea to put some small wire around it to make it a bit more secure? Don't want it popping off over a speed bump!



__________________

1960 Pontiac Laurentian (Restored)

1960 Pontiac Laurentian (Restored)

1960 Pontiac Laurentian (Under Restoration)

1950 Chevorolet Deluxe

1942 C15 Chevrolet (Puddle Jumper)

1939 Hudson Sedan 112

1939 Hudson Coupe 112

1975 Leyland Mini

1974 Jaguar XJ6L

 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Terry G


Veteran Member

Status: Offline
Posts: 59
Date:
Permalink  

Thanks for the advice Gayne.

My thought was to do it like we did our Club emblem that I attached to my grill.

I'm going to drill 1 hole in it below the n & c in Poncho and use a stainless steel bolt to attach it with a backing on the other side.

I think once I have it polished up like my grill emblem it might show up better.

Terry

IMG_3404.jpg 



Attachments
__________________

the 4 Dr HUD
firstdancebridalcars


Addicted!

Status: Offline
Posts: 203
Date:
Permalink  

Excellent idea Terry.

Just be aware that if you do polish it, you'll lose the 'brushed' finish, and possibly the triangle etch. But I'm assuming you want it in the same style as your current Iron Indians badge, so both matching would look good.

We had a few badges made that were polished, not brushed, and what we did was put a clear-coat on afterwards which keeps the shine and makes it easy to clean.

Pictures 4 and 5 at the top of this thread show a polished finish with clear-coat, which was one of our early efforts. We ended up going with the brushed finish beacuse it doesn't show up marks and fingerprints like a polished finish would.

__________________

1960 Pontiac Laurentian (Restored)

1960 Pontiac Laurentian (Restored)

1960 Pontiac Laurentian (Under Restoration)

1950 Chevorolet Deluxe

1942 C15 Chevrolet (Puddle Jumper)

1939 Hudson Sedan 112

1939 Hudson Coupe 112

1975 Leyland Mini

1974 Jaguar XJ6L

 

 
62 Laurentian


Member

Status: Offline
Posts: 13
Date:
Permalink  

Nameplate and keychain arrived today and they look great!  Now the set is complete...thanks.

Glenn



__________________

1969 Beaumont convertible, 1939 Chevy coach, 1959 Edsel Villager

 

https://www.flickr.com/photos_user.gne?rb=1&path=&nsid=59233090%40N04&page=1&details=1
1 2 3  >  Last»  | Page of 3  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Support Canadian Poncho -> Canadian Poncho Stainless Steel Laser Cut Keychains and Nameplates now available!
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.