Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> B body disc brake conversion AND I can keep my 14" wheels?
Post Info TOPIC: B body disc brake conversion AND I can keep my 14" wheels?
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
RE: B body disc brake conversion AND I can keep my 14" wheels?
Permalink  

That's what I'm trying to avoid, moving tons of useless (to me) junk. We've been in this house 22 years and I'm finding many many things, including car parts, that moved here with us 22 years ago. There is NO reason for that stuff to move again, no way.

We've already moved some stuff to the local thrift store, and there will be more (NOT car parts though!)

Did you buy the whole power brake disc conversion, or just the basic kit with rotors and bearings, calipers and brackets?

I assume you just use the same backing plates that are already on the car?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
luppy


Addicted!

Status: Offline
Posts: 322
Date:
Permalink  

Hi Carl

Because I had already had the twin master and the proportioning valve I got the kit without those. I can't remember if the backing plates are used of not, I will check later this morning and provide some photos as well.

Luppy



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
luppy


Addicted!

Status: Offline
Posts: 322
Date:
Permalink  

Hi Carl

The old backing plates are removed. Since I don't drive the Pontiac in foul weather I never gave it much thought. I would think that some backers from a S10 might be useable. Here are some photos of what it looks like.

LuppyDSCF0001.JPGDSCF0002.JPGDSCF0003.JPGDSCF0004.JPGDSCF0005.JPG



Attachments
__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

Thanks for the excellent pictures, that helps a lot!

I see there's some guys on ebay selling what I think is exactly your kit.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
1965CS


Guru

Status: Offline
Posts: 922
Date:
Permalink  

Carl Stevenson wrote:

My one concern is that it's CPP.

The Nova guys have had MANY issues with the CPP kit for the front end of their 62-67 Novas. I guess I'll keep reading. If it's a crappy kit, the details will come out online. That's the beauty of the internet, it's hard to hide crappy quality if you are selling car parts cause you'll get "outed".

 Carl, 

I initially did this conversion with a CPP kit and also found it it to be 'crappy' as far as quality goes.  Although the kit was supposed to be for 65-66 B body, I believe it was actually for an A, due to the rotor size etc., and pretty sure that 15" rims were required.  Also didn't like how it increased the track width by close to 1/2" per side, quite noticeable in appearance.  Since then, converted it to 69 Impala disc so now have larger 11" rotors with actual Delco calipers and track is original. 



__________________

65 Custom Sport Convertible

Southern Alberta
«First  <  1 2 | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> B body disc brake conversion AND I can keep my 14" wheels?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.