Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> 67 Parisienne panhard bar??
Post Info TOPIC: 67 Parisienne panhard bar??
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
67 Parisienne panhard bar??
Permalink  

Hi guys My car has the 4 link rear end. The pan hard bar has the big end and the little end . Is this right? I have heard there is a panhard bar that has a big end on both ends?? The axle is 12 bolt. I'm wondering if the panhard on my car is incorrect. It looks "short" Both rear coils look like there "pulled" the to the drivers side. Anybody have any ideas? Someone long ago made this convertible up out of 2 cars. What should the Centre to Centre length on the panhard be?also the rear of the car slumps slightly to the passenger side. Drives really nice..... Lot of questions I know... Thanks guys

__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
seventy2plus2


Canadian Poncho Superstar!

Status: Online
Posts: 7742
Date:
Permalink  

Yes, it should have one large end and one small end.  The large end bolts to the diff.  Station Wagons had a panhard bar with 2 small ends (I'm sure I had one here somewhere, but don't recall taking one off a station wagon).   I'll measure one of my spare bars this afternoon and get you a centerline to centerline distance.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

SGS Welding wrote:

also the rear of the car slumps slightly to the passenger side. Drives really nice..... 

        maybe new rear springs    



__________________

 
koolconvertible


Poncho Master!

Status: Offline
Posts: 1713
Date:
Permalink  

Spring may also not installed correctly, two different springs, I installed an adjustable panhard bar.



__________________

cutting a roof off a four door is NOT a convertible.....

65 Parisienne convertible.one of 49 built for RHD export market,402BBC, T400, 2500 stally, posi rear, upgraded brakes with front discs, FUEL FAST efi custom built by me.
seventy2plus2


Canadian Poncho Superstar!

Status: Online
Posts: 7742
Date:
Permalink  

36" centerline to centerline for panhard bar.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
Permalink  

Springs may be old and worn out. Thanks for the measurement seventy 2plus2 And as far as the springs being different... They must be a left and right??? If I want to replace the springs what should I go with ? Moog?? Thanks again guys

__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

Just for fun, try flipping the springs from side to side to see if it makes a difference. It's not too difficult, and you never know...

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Online
Posts: 7742
Date:
Permalink  

SGS Welding wrote:

And as far as the springs being different... They must be a left and right??? If I want to replace the springs what should I go with ? Moog?? Thanks again guys

The rear springs are the same left and right.  I think what koolconvertible meant was maybe someone installed two different springs instead of two of the same.   You should be able to get some Moog springs for your ride.   I went with Moog on my 70 Parisienne, had to go with what they call "Cargo Coils".  They look a bit different as they're made to handle heavier loads, but work fine.  Moog part # CC601.



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
Permalink  

Did those 601 springs make the car sit a little high ? Or did it look good? (I 'm sure your car looks good) I mean the stance Thanks

__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
seventy2plus2


Canadian Poncho Superstar!

Status: Online
Posts: 7742
Date:
Permalink  

Its stance is fine, maybe just a touch high but I've got new springs on the front too.  Take a look:

http://canadianponcho.activeboard.com/t60638021/august-2015-feature-car/

 



__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> 67 Parisienne panhard bar??
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.