Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> 1969/70 used 2+2 front springs in the 65?
Post Info TOPIC: 1969/70 used 2+2 front springs in the 65?
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
1969/70 used 2+2 front springs in the 65?
Permalink  

On the 65 the plan is to use a pair of used stock front springs that Clint had sent me many moons ago (thanks Clint). I knew I might need them someday.

If I remember right, they were from a 69 or 70 small block TH350 2+2 no air. Could be wrong. The question is, will they be suitable for the 65 Sedan?

327/M20 in a 65. How do you think the weight over the front would compare to the 69? I feel the front end on the 65 is very heavy, so it would have to be close. And the springs are used, so seasoned so to speak which is good.

Any ideas?



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 49987
Date:
Permalink  

What stance are you looking for Mark?

Flat?

60's style rake?

Stock? (which was slightly higher in front)

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

Just flat I guess. Being used, they might be fine. I refuse to use new front springs anymore. They are never right.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 49987
Date:
Permalink  

I am betting if you put those used ones in it will sit a teeny bit up in the front, but that's just guessing.

I still have my 283 springs in the front and the car sits pretty much perfectly flat. The new ones I got from you years back have never even come out of the box!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

I did contemplate using the original 6 springs, but I think she'd drop quite a bit. Although the car did sit fairly high in pictures when the motor was in.

Funny, I took the shocks out and placed a trolley jack under the arm raising the frame off the stand about 1/2". Zip cut the upper ball joint shaft right through the boot...and when it let go there was nothing, No pop or upward movement of the body at all. And this was with no engine in the car! 

I'm used to seriously cringing when popping the upper ball joint when pulling front springs. 



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 49987
Date:
Permalink  

I am quite sure you'd be disappointed with the 6 cylinder springs unless you want it pretty low with a rake.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7743
Date:
Permalink  

If I remember correctly, the springs were from a 70 Parisienne or Laurentian small block car - but don't quote me on that.

Re the 6 cylinder springs, I always understood the 250 6 cylinder engine to be heavier than a small block V8. So I figured they'd pop the front end up a bit, not drop it down.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
norontcan


Canadian Poncho Superstar!

Status: Offline
Posts: 6989
Date:
Permalink  

65 Laurentian 2 door sedan with 6 cyl = 3360# shipping weight. With a V8 shipping weight = 3510# ( taken from sales facts book )

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> 1969/70 used 2+2 front springs in the 65?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.