Save 5% at Vevor and Support Canadian Poncho!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Off Brand Cars/Parts Wanted -> Brake Conversion Advice for 1968 GMC 1500
Post Info TOPIC: Brake Conversion Advice for 1968 GMC 1500
Winnipeg


Addicted!

Status: Offline
Posts: 358
Date:
Brake Conversion Advice for 1968 GMC 1500
Permalink  

Hi Folks

In the non-brand discussion, I am looking for advice on a good source for a conversion kit to convert my 1968 GMC 1500 series from manual drum to front power disc and rear drum brakes.

Any recommendations for kits? Any Canadian suppliers?

Thanks



Attachments
__________________
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8240
Date:
Permalink  

lots of guys use 73 and up halfton stuff it all bolts in however you end up with 5 bolt pattern wheels or check kmstools for a conversion kit

__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
68 Grande


Guru

Status: Offline
Posts: 828
Date:
Permalink  

If the 78 C10 spindles fit your 68, I have an extra set of front disc spindles for sale that came off my 78.  The square body calipers are cheap, Rock Auto has bearings, pads, lines, use your CP 5% discount, etc.    



__________________

Now appearing as "68 Grande" 
cranks38


Addicted!

Status: Offline
Posts: 265
Date:
Permalink  

Try Scott's

www.scottssupertrucks.com/contactus.asp

.

__________________

 

My name is ___ but you can call me Vern

- Professional beer can recycler - 
64 SportWagon


Guru

Status: Offline
Posts: 787
Date:
Permalink  

I just went to wreckers for square body spindle set,bolted right on to my 63 c10 ,rotors calipers from jobber in town,maybe 300$ in total,flex lines on parts truck were new,so made it cheaper and already had power brake parts in stock from an a body...

__________________
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4475
Date:
Permalink  

You will have to use the 73 and up brake hoses with this conversion, and make up some new brakets to hold hte hoses,  but yes the 73 and up setup would be better than the 71/72.  the hoses for the 71/72 are hard to find.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50251
Date:
Permalink  

So can a guy strip a 73 and up, then bolt it all into a 68?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4475
Date:
Permalink  

I've never actually done it, but i think so.  i think you have to do something with the baljoint size tho.

All in all,  just stick to all the stock drum brakes for a 68, then splurge on the best set of shoes, bleed it all properly, and it will stop fine unless you drive like a maniac on the US interstate.

I have 68 trucks as daily drivers, all stone stock,   no problems for me,  i love it,  and manual drums too,  i just dont like the low pedal feel of power,  but thats just my opinion, from a guy that drives nothing but old cars and trucks on a daily basis,  its what i am use to, so i know what the trucks are capable of doing, and drive accordingly.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
66 Grande guy


Canadian Poncho Superstar!

Status: Offline
Posts: 4898
Date:
Permalink  

I agree. I have a 1969 Chevy pickup with drum brakes and have driven all over all Alberta in the last ten years with no trouble from the brakes (or anything else for that matter)

As PJ O'Rourke once said, you need disc brakes if you are doing repeated panic stops. If you are having to do repeated panic stops, you have a lot bigger problems than your brakes!



-- Edited by 66 Grande guy on Tuesday 31st of March 2020 10:28:13 PM

__________________

ken from northern Alberta

38 Willys pickup electric

39 Buick (327 with 700 r4)

66 Beaumont 4 door hardtop

69 Chevy CST pickup

1976 GMC 23'  motorhome

1994 Impala SS 

1968 Citroen Fourgonnette (Yeah Carl!)
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

4SPEED427 wrote:

So can a guy strip a 73 and up, then bolt it all into a 68?

 Can bolt the whole cross member in



__________________
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

timbuk wrote:

lots of guys use 73 and up halfton stuff it all bolts in however you end up with 5 bolt pattern wheels or check kmstools for a conversion kit

 x2  Just put stock 74 disc on the front of my 66 (all stock parts) and welded/re drilled the rear axles to 5 on 5. Ended up with an extra set of ball joints if you need them. 

 

disc brakes.jpg



Attachments
__________________
Winnipeg


Addicted!

Status: Offline
Posts: 358
Date:
Permalink  

Thanks everyone for all of the information and help.
I've decided to keep the manual drums for now and get them fixed up in top notch shape and see if i'm happy with them.

Great discussion and thanks all.



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8240
Date:
Permalink  

hawkeye5766 wrote:
timbuk wrote:

lots of guys use 73 and up halfton stuff it all bolts in however you end up with 5 bolt pattern wheels or check kmstools for a conversion kit

 x2  Just put stock 74 disc on the front of my 66 (all stock parts) and welded/re drilled the rear axles to 5 on 5. Ended up with an extra set of ball joints if you need them. 

 

disc brakes.jpg

 ok jim did you switch out the crossmember or did you use the 66 spindle for that? i still run drums on my 65 and have ni issue,im just cruzin around



__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6076
Date:
Permalink  

timbuk wrote:
hawkeye5766 wrote:
timbuk wrote:

lots of guys use 73 and up halfton stuff it all bolts in however you end up with 5 bolt pattern wheels or check kmstools for a conversion kit

 x2  Just put stock 74 disc on the front of my 66 (all stock parts) and welded/re drilled the rear axles to 5 on 5. Ended up with an extra set of ball joints if you need them. 

 

disc brakes.jpg

 ok jim did you switch out the crossmember or did you use the 66 spindle for that? i still run drums on my 65 and have ni issue,im just cruzin around

 Just changed the spindles (74) ball joints the same as long as not an 8 bolt(larger) and also heard 71-72 ball joint tapper is diff (odd ball) same right up to mid 80's i think (for 1/2 ton). Also put PS box from 78 I think...used CP adaptor plate.



__________________
rebelrouser


Poncho Master!

Status: Offline
Posts: 1367
Date:
Permalink  

Wow! 13+ years ago while at Pick your part here in Calgary I came across 4 sets of 4 piston brake sets-spindles and all- from '68-'70 Chev/GMC 1500's. I bought them all for $250 or so and ended up giving them to an acquaintance of mine north of Calgary. The fellow had a huge collection of that generation of pick ups that he was collecting parts for. I never knew that they would end up becoming so sought after. Wish I had them now.......

__________________
"No matter how much you change, you still have to pay for the things you've done".
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4475
Date:
Permalink  

With all due respect,  i think you might be mistaken on those disc set ups.  The Disc brakes were first used on the 1971 C10's and they were just a standard basic single piston caliper design, very simple.  there was never a 4 piston or anything like that on any of the 1/2 ton GMC or chevy c10 from 1968-72.

But i could be wrong when it comes to the 8 bolt 3/4 ton setups,  i am not sure.  

The main difference between the 71/72 and the later 73 and up is the length of the brake hoses and the way they route.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Off Brand Cars/Parts Wanted -> Brake Conversion Advice for 1968 GMC 1500
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.