2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Tear down, clean and lube a 60's GM wiper motor yourself.


Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:
Tear down, clean and lube a 60's GM wiper motor yourself.


I'm looking for something to dig into right now. The wiper motor from my 65 works, but it certainly needs a spruce up on the grungy case and body, and probably some lubrication. So it'll make a good small project.

It has an aftermarket washer pump setup, which I kind of like, so it might not even be original. But it does have a Ternstedt stamp on it, so who knows.

 

Can it be taken apart, bead blasted, cleaned, lubed, maybe painted, and then put back together successfully DIY?

Anyone ever done it?

w1.jpgw2.jpg

 

 



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 6944
Date:
Can you tear down, clean and lube a 60's GM wiper motor yourself?


Is the motor case held together with screws or is it crimped?

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

Screws,

By the numbers, looks like the bulk of it is a genuine 65 2 speed motor,

blt.jpgcode.jpg

cd.jpg

Capture.JPG



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


A Poncho Legend!

Status: Offline
Posts: 26766
Date:

I worked with a GM master tech who worked at Addison's in the 1960's. I remember him saying "We rebuilt everything except power seat motors" so if you were to believe him I'd say it is possible.

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Guru

Status: Offline
Posts: 887
Date:

I would say yes, only because I will delve into anything....  I dismantled a non working power top motor in worse condition and was able to get it working fine. The tricky part can be getting the brushes to line up on assembly, so made a special tool to do it.

Figured the motor would last maybe a year, been 15 now.



-- Edited by 1965CS on Wednesday 10th of February 2021 08:10:36 AM

__________________

65 Custom Sport Convertible

Southern Alberta



Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

I'll give it a shot then. Maybe I'll document it. Thanks.

BTW, have you seen the price of a rebuilt date correct one? Lets just say it's worth to try cleaning up what you have.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Poncho Master!

Status: Offline
Posts: 1836
Date:

As a 20 year old I had just bought my first 59 and the wipers didn't work. I managed to take it all apart at the kitchen table, ( Mom and Dad weren't home ) clean and put it back together and it worked! So I am quite confident you are up to the task Mark. Make notes and pictures as you go and you will be fine.

__________________

Stony Mountain, MB

65 Impala SS 2dr HT
65 Impala convert.
59 Impala 2dr HT
67 Acadian Canso 2dr HT

 

 

 



A Poncho Legend!

Status: Offline
Posts: 48634
Date:

cdnpont wrote:

I'll give it a shot then. Maybe I'll document it. 

 


 Yes, please do. That is one of those things I've never had to tackle and was always happy to be able to leave it alone....would love to see what makes one tick.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:
Tear down, clean and lube a 60's GM wiper motor yourself.


It shouldn't be too difficult. With the aftermarket washer pump assembly, it will at least make that component way easier to deal with.

The thing I'm not sure about, can the stator be pulled out from the cast case? I'd like to give the case a bead blasting, so it really needs to be bare or the glass will get behind everything.

Here's the 2 speed wiper assembly from the 1965 service manual,

 

50938704088_20c8cdce8c_c.jpg50939398491_d61ac5c35c_c.jpg

50939504362_95cee45e16_c.jpg

50938704063_8693215491_c.jpg

50938704078_bd038efb83_c.jpg

50939504342_05f59f990e_c.jpg

50939398546_ca040ba729_c.jpg



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 6944
Date:
Can you tear down, clean and lube a 60's GM wiper motor yourself?


There's a pretty good exploded view in the parts book.

__________________


A Poncho Legend!

Status: Offline
Posts: 26766
Date:

Can you buy replacement parts like brushes etc?

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:
Tear down, clean and lube a 60's GM wiper motor yourself.


Well, I was able to tear it down. The small snap ring (fig. 69-11) can be fussy if you don't have the plyers with tiny pins. I drilled out the 4 small rivets to get the brush plate out. I'll use small machine screws on the way back.

Cut some wires to separate the components, which I'll resolder when I re assemble it. The stator comes out of the housing pretty easily with a little light prying side to side. 

Note; when pulling the armature from the brush plate, be ready to catch the thrust ball bearing (fig.61-6) in the shaft end, it's likely to fall out, and we know how that goes!

Also, as noted in the illustration of the drive gear showing the red arrows; Before pulling the gear back out through the case, you should make sure there are no burrs in the area of the arrows. If there is, they will gouge the two main bronze bushings on the way out. Give this end of the gear a good inspection and cleanup with a small file before pulling it through.

 

50930679897_7a63063daa_c.jpg

sharp.JPG



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Poncho Master!

Status: Offline
Posts: 1836
Date:
Can you tear down, clean and lube a 60's GM wiper motor yourself?


That sure didn't take long........

__________________

Stony Mountain, MB

65 Impala SS 2dr HT
65 Impala convert.
59 Impala 2dr HT
67 Acadian Canso 2dr HT

 

 

 



Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

Cleaned up the body. I think I'll clear the aluminum, and probably paint the motor can. Maybe black or grey?

kkj.jpg

 



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Guru

Status: Offline
Posts: 625
Date:

Looks nice. Sure are alot of parts inside.

Bill.

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

So far, it looks like the carbon brushes are in good shape and are still fairly long. The armature and the stator look good, I'm assuming all is good owing to it being a working unit. 

 

A limited number of parts are available on line (eBay),

Found so far,

Mounting Grommets, Brass grounding strip, Rubber crankshaft seal (my original is cracked and brittle). Have seen some NOS magnetic parking relays and the foam firewall seal, but that is about it so far. 

If anyone see's anything else, let me know. I'll add to this as I go.

 

Question: What grease would you use on the worm gear, bushings and the parking follower on the gear? Something that won't run or melt? I have some synthetic Super Grease. Will that be suitable?



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

For those who are interested, I'll take some images and describe it as I put this motor back together, taking it apart requires no special tools.

First, I think to ever properly clean the case (glass bead blast), you really have to pull the stator from it. The manual description shows a GM puller tool. You could easily make one, but being impatient, I found it can be done by gently and slowly prying it out side to side with a flat head. It isn't glued in, at least in 1965. Go easy. Make a reference mark showing the stator to case orientation. A notch on the case, and mark on the stator plates will help. Another thing I think that has to happen is you'll need to cut the wires to the brush plate along with the two stator winding wires. This will give you free access to cleaning everything. You don't have to, but if you are going all the way, then yes. Take a ton of pictures.

Prying the stator out from the case, then re-installing the stator. Use the motor bell bolts and marks to get it just right (see arrow). I filed the obvious sharp edges off the first stator plate to help it go in the case a little easier. Tapped it in with a brass drift a little at a time, side to side until it bottoms on the case edge. Used a c clamp and a small piece of wood as a backstop.

c1.jpgtr.jpg

c2.jpg

 

c3.jpg

 

 

 

 



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 6009
Date:

Good info...fallowing along. Maybe change the heading for future reference? Wiper motor rebuild? etc



-- Edited by hawkeye5766 on Friday 12th of February 2021 11:46:18 PM

__________________


A Poncho Legend!

Status: Offline
Posts: 48634
Date:

Just remove the question mark in the heading!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Canadian Poncho Superstar!

Status: Offline
Posts: 6009
Date:

4SPEED427 wrote:

Just remove the question mark in the heading!


 and maybe the question...Can you....

 

tear down, clean and lube a 60's GM wiper motor yourself



-- Edited by hawkeye5766 on Friday 12th of February 2021 11:57:24 PM

__________________


A Poncho Legend!

Status: Offline
Posts: 48634
Date:

I'm scared to edit his post, he's a moderator, he might get me banned.

You know what moderators can be like...

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



A Poncho Legend!

Status: Offline
Posts: 26766
Date:
Tear down, clean and lube a 60's GM wiper motor yourself.


I changed the title.

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



A Poncho Legend!

Status: Offline
Posts: 48634
Date:

Well yeah, you get to do whatever you want around here!



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Guru

Status: Offline
Posts: 625
Date:

Mark,

I have several 63-64 wiper motors in my shed. If you break something I will donate a unit to the cause that can be mined for parts if you think they would fit.

Bill.

__________________


A Poncho Legend!

Status: Offline
Posts: 48634
Date:

All credit to Mark for having the guts to do this.

And also being willing to document it.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.