Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> Has anyone tried to glue body trims?
Post Info TOPIC: Has anyone tried to glue body trims?
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Has anyone tried to glue body trims?
Permalink  

Hey there, I found a nice set of trims including wheels well pieces, unfortunately with no those nice wide stainless steel panels, only thin trims and wheels well trims. For wheel well it seems I have most of holes, not a big issue to drill a couple more (except the very rear wheel well piece, it doesn't seem to match body lines perfectly, it seems much more curvy that body line on mine, and seems a bit longer too).

The issue starts with the thin horizontal trims. The holes on mines are sealed and I'm not 100% I'd like to drill the body, so mu question is - anyone tried to put them on 3M tape or something? Maybe sticky foam? Or they are too heavy and will turn projectiles on a first road bump?

PS. Does anyone have a closeup image of the very rear wheel well pieces attachment?

IMG_20240307_163258.jpg



Attachments
__________________

1965 Parisienne Custom Sport

Burlington, ON
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50219
Date:
Permalink  

I know guys who use windshield urethane sometimes but with that style of moulding you'd have to fill the entire backside of that channel. If everything is clean and if you used some urethane primer first I bet it would work well though.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

Hmm.. whoa, that's gonna take like 5 buckets of urethane:)  I thought maybe a thick and thin double sided foam... But maybe il just go with the drilling:( 

Will need to find specs on where to make holes.

 

Forgot to show the piece of concern:

IMG_20240414_152358.jpg



Attachments
__________________

1965 Parisienne Custom Sport

Burlington, ON
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10624
Date:
Permalink  

Looks like the repair didn't take into consideration that the lower quarter has a slight concave.

This might sound dumb, But I'd actually consider cutting a slot in that trim to the inside . One cut at your thumb, and another at about 1" up from the bottom.

Then bend it to fit the flat lower line.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

There's a decent chance I'll have to:(
Yeah, it feels like something went wrong when the car was done last time. However it feels like metal, not bondo.

__________________

1965 Parisienne Custom Sport

Burlington, ON
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50219
Date:
Permalink  

The problem with drilling the holes is trying to find those goofy clips they used. They are quite an oddball clip.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

Yeah, the clips look odd indeed, moreover, they are different in two sets I got.

__________________

1965 Parisienne Custom Sport

Burlington, ON
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10624
Date:
Permalink  

I would seriously consider using 3M mounting tape rather than drilling. Properly prepped where it's to sit, the stuff works very well.

It there is holes in the trim, cut the heads off some stainless screws and silicone them over the holes!



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
1965CS


Guru

Status: Offline
Posts: 926
Date:
Permalink  

Neilvermilion wrote:

 

PS. Does anyone have a closeup image of the very rear wheel well pieces attachment?

 

 This is what mine looks like. Original pieces so quite pitted, plus it's not very clean and needs a good polish.

reartrim.jpg



Attachments
__________________

65 Custom Sport Convertible

Southern Alberta
ABC123


Uber Guru

Status: Offline
Posts: 3560
Date:
Permalink  

Back in 2012 I used 3M Marine Grade Silicone Sealent on my one car.

(No, 1988 Cougar pictures for those sensitive eyes)

Fast drying, and the big heavy moldings have not moved since.

Your dry-fit has to be perfect with this stuff !

Not cheap but will not ever move.

I am not sure if it would work this well with stainless.



-- Edited by ABC123 on Sunday 14th of April 2024 09:07:59 PM

__________________

https://canadianponcho.activeboard.com/t63333628/click-here-to-support-canadian-poncho/

 
Neilvermilion


Addicted!

Status: Offline
Posts: 287
Date:
Permalink  

Thanks for the advise and the photo. Will try some 3M.

__________________

1965 Parisienne Custom Sport

Burlington, ON
73SC


A Poncho Legend!

Status: Offline
Posts: 20261
Date:
Permalink  

cdnpont wrote:

I would seriously consider using 3M mounting tape rather than drilling. Properly prepped where it's to sit, the stuff works very well.

It there is holes in the trim, cut the heads off some stainless screws and silicone them over the holes!

 Sorry to be late on this but totally agree here with Mark. Used 3M mounting tape on trim, fender flasher and emblems -  next to impossible to remove. 



__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10624
Date:
Permalink  

The stuff actually gets chemically stronger the longer you leave it on.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> Has anyone tried to glue body trims?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.