i know my battery is low i was cracking it for a couple days and still no go i made sure my timing was just about perfect i did the timing then cracked it over a couple of times rotated the engine back to the 0 mark and it was still good pointing at the #1 plug =) and my feul is old....4 months maybe....so it could be my feul doing it?. ill walk up the the gas station and got more gas and try it again =)

Be sure you are TDC #1 on compression stroke. Might be 180 degrees out. Still on TDC but #6 compression not #1. Four month old gas shouldn't be an issue. My car comes out of storage after six months with no gas issues and no stabilizer either. Has this engine sat for a long time - like years? Also may have stuck valves. Compression check?

Have you got a 10 gauge wire on the power side??

jonathanD wrote:

---

so my engine is timed and she still won't kick over  when she was trying looks like lint or mouthballs coming out of the cylinders im thinking it might be my battery it might be low because everything is slowing down... but i'm not back firing anymore and smoke is coming out of the right exhaust port at the right time  stilll Nooooo go im wondering what's going on i think i might pop the valve covers off to see if there is anything in there anyone have any idea's?

-- Edited by jonathanD on Monday 23rd of May 2011 05:26:43 PM

---

  What do you mean lint or mothballs coming out of the cylinders? Is it possible mice got inside the engine and it is blowing a nest out?

 There should be no reason to pull the covers.

 Was the engine running a year ago when you took it out?

 A good, well charged battery is a must.

 

The engine was a runner when removed. I walked Jonathan through the timing and it sounds like it should be bang on. He is only pouring fuel through the carb, no line hooked up. I would think a good charge and if there is someone near to have a look to make sure he has good spark and good temporary wiring it should fire!!  Sure wish I lived closer :(

-- Edited by unclebernie on Monday 23rd of May 2011 06:52:54 PM

i think i just found my issue  a couple of the boots in the wires that hold the end of the plug a few of them are bent and a couple are missing lol i justt went out in the poring rain and crawled under the tarps lol im wet as if i had a shower but could that be the issue.

jonathanD wrote:

---

 

---

 Looks like a decayed molar! Good luck with getting it running!

Funny you didn't kick him out when you first had it spinning over.....

Oh i have to take the valve cover off ive got a big oil leak coming from the side of the valve cover it showed up when i was cracking it over it's very large... i was crancking it for maybe 1min and wow it seems like the gasket fell off it's sagging lol i know how does a gasket sage  well it is lol ill just change over to the chrome ones =)

it's leaking alot of oil ill take a picture =)