3/8", 0-30 inch pound dial indicator torque wrench wanted.

cdnpont · Canadian Poncho Superstar!

3/8", 0-30 inch pound dial indicator torque wrench wanted.

deleted · Guru

....just my 2 cents , but I like the clicker type wrench better. Don't have to look at the dial especially if you are off angle twisting yourself. Just set the torque and pull till your hear the click. Really great for doing head bolts. Available at Princess , c-tire and other stores.

Greaser · Canadian Poncho Superstar!

Johnny Ringo wrote:
....just my 2 cents , but I like the clicker type wrench better. Don't have to look at the dial especially if you are off angle twisting yourself. Just set the torque and pull till your hear the click. Really great for doing head bolts. Available at Princess , c-tire and other stores.

x2 used the Princess Auto wrench on head bolts as well.........like the click, seems more accurate...no issues after 8 months.

hawkeye5766 · Canadian Poncho Superstar!

I think the only problem with the click type is that when setting pinion preload you want to be able to read the preload while rotating. Mark, could you use a 1/4" dial indicator torque wrench with a 1/4-3/8 adaptor. Think the 1/4" is more common with inch pounds.

cdnpont · Canadian Poncho Superstar!

Yes Jim, a 1/4 with the adapters would work. Maybe it was actually a 1/4" that I had back when. hmm

No expert, but like said, you really need the dial type to get a good measure of pinion preload. There is no real way around it, I've seen some guys try a fish scale on a 12" bar, but I wouldn't trust it. Even the bar deflection type can be difficult to read when spinning. A click type will click on breakaway torque, and you could have a reading significantly lower than needed on run, which is really not good. A small scale in the 0-30 in/lb range on the dial is best as well. The measurement is so sensitive that top builders always just use a small amount of oil on the bearings, and never use grease.

Imop, as far a getting it right, pinion preload seems to be on par with pattern. So I want to get it right.

Cheers, Mark

Professur · Guru

I'm trying to remember ... there was a tool supplier online that specialized in bike tools. Had a small beam type torque wrench.

oshawacliff · Poncho Master!

Mark: Worth a try
Parts Source
1435 Plains Rd E, Burlington, ON L7R 3P9
(905) 637-4445

In-Store Services
Need a special tool? We'll lend it to you - ask about our FREE Loan-A-Tool Program. Need to look something up? We can help with that too with our On Demand automotive database with information on hundreds of repair jobs... and print out detailed schematics absolutely FREE! Just need to get your battery or alternator checked, ask about our FREE Electrical Testing Program.
Cliff

Love to see all of that suspension stuff going in....