Hello everyone, i need to replace the front door glass from my 60 bubble top. I have the glass removed and just wondering if there are any tricks or tips on getting the top and lower chrome channels off then back on the new glass. Thx in advance
Never done this, I wonder if it's detailed in the shop manual?
__________________
63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC. 1963- Pontiac top selling car in Canada
Mahone Bay, NS Still not old enough to need an automatic
I just replaced all my glass, on my 64 parisienne. I used a heat gun and some insulated leather glove to pry them apart.
Installing glass into the channel went easy with Ammonia free foaming glass cleaner as a lubricant. Just wrap the setting tape on the glass, spray the channel and insert glass. I used 2 racket straps and rags to pull the glass into the channel.
__________________
pontiax- (canadian pontiac X frame)1964 Parisienne 2dr. hdtop lagoon aqua metallic (Q)
I just replaced all my glass, on my 64 parisienne. I used a heat gun and some insulated leather glove to pry them apart.
Installing glass into the channel went easy with Ammonia free foaming glass cleaner as a lubricant. Just wrap the setting tape on the glass, spray the channel and insert glass. I used 2 racket straps and rags to pull the glass into the channel.
measure where the cannel is on the glass once its off use urathane
Great info , thank you all , i just got the glass out using the method Pontiax mentioned. I need to decide if im going to use the lower channel , its got some rust inside the channel. The last post mentioned using urathane, is that used without setting tape?
