Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> Starter motor question; for 153 tooth, manual.
Post Info TOPIC: Starter motor question; for 153 tooth, manual.
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10622
Date:
Starter motor question; for 153 tooth, manual.
Permalink  

I know it's been gone over before, but will all straight across bolt pattern starter motors work on a 153 tooth manual flywheel?

More importantly, will the straight across style fit in the smaller bellhousing? Specifically a GM 3840383.

Above all, do I need a straight across pattern starter with a specific nose style?

Thanks, Mark



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50216
Date:
Permalink  

I'm quite sure you have exactly what you need there Mark. I am currently running my original bellhousing with the 283 (same as 6 cylinder) starter with the straight across bolts. That is the only starter that works with that flywheel as far as stock starters go.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10622
Date:
Permalink  

This is good, as the old 250 has a straight across style starter in good working order. I was worried that only a Iron nose starter would work/fit. Thanks Carl.



__________________
 67 Grande Parisienne 4 door HT. 69 Parisienne Convertible.
 
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50216
Date:
Permalink  

No problem.

The beauty of GM and it's interchange. You can pull out a 194 and drop in a 427 using the 194 starter and flywheel/flexplate on the 427! All interchanges except 292, 400 small block and 454. And of course the 86 and up with the one piece rear seal use different flywheels/flexplates.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Prefectca


Poncho Master!

Status: Offline
Posts: 1758
Date:
Permalink  

4speed427, do you think the 9 1/2 clutch from the 194 would live behind a big block?
But on the serious side there are some small blocks not drilled to take the starter for the large flywheel. A friend years ago put a manual in his car and used a truck flywheel and truck aluminum bell housing. The last thing was the starter and he found that he only had one bolt hole. Ended up using a cast iron truck bell and the starter that bolts to the bell housing.

Paul

__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50216
Date:
Permalink  

It might last for until the first clutch dump at 4000 rpm!

What engine was that on? I have heard guys talk about that but I guess never really paid attention to whether or not a block had it.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Prefectca


Poncho Master!

Status: Offline
Posts: 1758
Date:
Permalink  

If I recall it was a 1964 283 that was lacking the hole in the block.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50216
Date:
Permalink  

Ah, ok. Most of the stuff I've played with has been 66 and up, some 65 though too.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Prefectca


Poncho Master!

Status: Offline
Posts: 1758
Date:
Permalink  

That would make sense as the turbo 400 used the large flywheel if I recall.

__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50216
Date:
Permalink  

Yes, always as far as I've ever seen.

Any big block, any TH400 should always be the 168 tooth.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> Starter motor question; for 153 tooth, manual.
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.